期刊文献+

麦秸纤维/聚丙烯复合材料 被引量:1

Wheat Straw Fiber/Polypropylene Composite
下载PDF
导出
摘要 为了充分利用农业剩余物资源、降低材料的成本,本文将麦秸纤维与聚丙烯复合制备绿色环保型材料,研究了硅烷偶联剂种类、麦秸纤维含量以及相容剂MAPP含量对材料力学性能的影响,采用扫描电镜、体视显微镜观察麦秸纤维的分散性以及材料的冲击断口形貌。结果表明:KH550或A151表面处理明显降低了麦秸纤维的极性,改善其与聚丙烯的相容性,提高了材料的力学性能;当麦秸纤维质量分数为25%左右时,在聚丙烯基体保持均匀分散,增强效果最佳;当MAPP质量分数为8%左右时,材料的拉伸、弯曲以及冲击强度均达到最大值。 To fully utilize the abundant agricultural residues and reduce the cost of material,environmentally friendly composite materials were prepared by compounding of wheat straw fiber and polypropylene.The effects of the kinds of coupling agent,the amount of wheat straw fibers and MAPP compatibilizer on the mechanical properties of material were studied.Dispersion of wheat straw fibers and surface morphology of impact fracture were observed by SEM and stereomicroscope.The results show that after wheat straw fibe...
出处 《宇航材料工艺》 CAS CSCD 北大核心 2008年第3期40-44,共5页 Aerospace Materials & Technology
基金 校企横向预研课题资助项目(1006-264006)
关键词 麦秸纤维 聚丙烯 复合材料 力学性能 Wheat straw fiber Polypropylene Composite Mechanical property
  • 相关文献

参考文献5

  • 1[1]Ayse Alemdar,Mohini Sain.Isolation and characterization of nanofibers from agricultural residues-wheat straw and soy hulls.Bioresouree Technology,2007 ;97 (2):1~8
  • 2[2]Panthapulakkal S,Zereshkian A,Sain M.Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites.Bioresouree Technology,2006 ;97 (2):265~272
  • 3[3]Suhara Panthapulakkal,Mohini Sain.Injection molded wheat straw and corn stem filled polypropylene composites.Journal of Polymers and the Environment,2006 ; 14 (3):265~272
  • 4李本贵.植物纤维与热塑性塑料复合界面相容性研究[J].企业技术开发,2006,25(1):24-26. 被引量:6
  • 5郑玉涛,陈就记,曹德榕.改进植物纤维/热塑性塑料复合材料界面相容性的技术进展[J].纤维素科学与技术,2005,13(1):45-55. 被引量:52

二级参考文献48

  • 1Selke S E, Wichman I. Wood fiber/polyolefin composites[J]. Composites Part A, 2004, 35: 321-326.
  • 2Canché-Escamilla G, Rodriguez-Laviada J, Cauich-Cupul J I, et al. Flexural, impact and compressive properties of a rigid-thermoplastic matrix/cellulose fiber reinforced composites[J]. Composites Part A, 2002, 33: 539-549.
  • 3Cai X L, Riedl B, Ait-Kadi A. Cellulose fiber/poly(ethylene-co-methacrylic acid) composites with ionic interphase[J]. Composites Part A, 2003, 34: 1075-1084.
  • 4Pickering K L, Abdalla A, Ji C, et al. The effect of silane coupling agents on radiata pine fibre for use in thermoplastic matrix composites[J]. Composites Part A, 2003, 34: 915-926.
  • 5Andersson M, Tillman A M. Acetylation of jute: Effects on strength, rot resistance, and hydrophobicity[J]. J Appl Polym Sci, 1989, 37: 3437-3447.
  • 6Ichazo M N, Albano C, González J, et al. Polypropylene/wood flour composites: Treatments and properties[J]. Compos Structures, 2001, 54: 207-214.
  • 7Mahlberg R, Paajanen L, Nurmi A, et al. Effect of chemical modification of wood on the mechanical and adhesion properties of wood fiber/polypropylene fiber and polypropylene/veneer composites[J]. Holz als Roh-und Werkstoff, 2001, 59: 319-326.
  • 8Sahoo P K, Samantaray H S, Samal R K. Graft copolymerization with new class of acidic peroxo salts as initiators.Ⅰ. Grafting of acrylamide onto cotton-cellulose using potassium monopersulfate, catalyzed by Co(II)[J]. J Appl Polym Sci, 1986, 32(7): 5693-5703.
  • 9Krishnan M, Narayan R. Compatibilization of biomass fibers with hydrophobic materials[J]. Mat Res Soc, 1992, 266: 93-104.
  • 10Zafeiropoulos N E, Williams D R, Baillie C A, et al. Engineering and characterisation of the interface in flax fibre/polypropylene composite materials. PartⅠ. Development and investigation of surface treatments[J]. Composites Part A, 2002, 33: 1083-1093.

共引文献53

同被引文献9

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部