期刊文献+

添加1%TiC和1%La_2O_3钨/铜FGM的性能研究 被引量:1

Properties of W/Cu FGM Containing 1%TiC or 1%La_2O_3
下载PDF
导出
摘要 通过超高压力通电烧结制备了添加1%TiC和1%La2O3的W/Cu FGM,研究了其烧结、层间剪切强度及抗热冲击性能;此功能梯度材料气孔率在11%左右;在激光功率密度200 mW.m-2下,对此材料进行激光热冲击试验,冲击1000次,含1%La2O3钨-铜梯度材料表面没有损坏,而含1%TiC钨-铜梯度材料表面出现裂纹。并对此材料抗热冲击现象进行了简要分析。 W/Cu functionally gradient materials(FGMs) containing 1%La2O3 and 1%TiC respectively were prepared by a way of graded sintering under ultra-high pressure (GSUHP).The specimens were measured to be low porosity(11.57% and 11.35% respectively).Shearing strength of the specimens between layers is better.What′s more,the specimens still demonstrate good performance in testing thermal-shock resistance.When power density of laser is 200 mW·m-2,the specimens were tested by thermal-shock resistance(1000 times),those who contained 1% La2O3 do not damage,but those who contained 1%TiC begin to crack.Finally,effect of additives on thermal-shock resistance was also preliminarily discussed.
出处 《稀有金属》 EI CAS CSCD 北大核心 2006年第z2期89-92,共4页 Chinese Journal of Rare Metals
关键词 W/Cu FGM TIC LA2O3 层间剪切强度 抗热冲击性能 W/Cu FGM TiC La2O3 shearing strength,thermal-shock resistance
  • 相关文献

参考文献11

  • 1[1]Smid I,Akiba M,Vieider G,et al.Development of tungsten armor and bonding to copper for plasma-interactive component[J].J.Nucl.Mater.,1998,258-263:160.
  • 2[2]David J W,Barabash V R,Makhankov A,et al.Assessment of tungsten for use in the ITER plasma facing components[J].J.Nucl.Mater.,1998,258-263:308.
  • 3[3]Ioki K,Barabash V R,Cardella A,et al.Design and material selection for ITER first wall/blanket,divertor and vacuum vessel[J].J.Nucl.Mater.,1998,258-263:74.
  • 4[4]Niino M,Hirai T,Watanabe R.Functionally gradient materials[J].J.Jpn.Comp-Mater.(in Japan.),1987,13(6):257.
  • 5[5]Takahashi M,Itoh Y,Miyazaki M,et al.Fabrication tungsten/copper graded material[J].Int.J.of Refract Met.Hard.Mater.,1993-1994,12(5):243.
  • 6[6]Itoh Y,Takahashi M,Takano H.Design of tungsten/copper graded composite for high heat flux components[J].Fusion Engineering and Design,1996,31(4):279.
  • 7[7]Jedamzik R,Neubrand A,Rodel J.Functionally graded materials by electrochemical modification of porous performs[J].Shiota I,Miyamoto M Y.Elsevier Science BV.Functionally Graded Materials,1996.1997.233.
  • 8[8]Jedamzik R,Neubrand A,Rodel J.Characterization electrochemically processed graded tungsten/copper composites[J].Materials Sci.Forum.,1999,308-311:782.
  • 9[9]Birth U,Joensson M,Kieback B.Powder metallurgical processing and properties of copper/tungsten gradients[J].Ibid,1999,308-311:766.
  • 10凌云汉,周张键,李江涛,杨大正,葛昌纯.超高压梯度烧结法制备W/Cu功能梯度材料[J].中国有色金属学报,2001,11(4):576-581. 被引量:30

二级参考文献12

  • 1钱家溥.聚变能开发与聚变堆材料研究.’96中国材料研讨会论文集[M].北京,1998.215-218.
  • 2Chang-chun Ge,Jiang-tao Li.Development of Functionally Graded Plasma-Facing Materials [J].J.Nucl.Mater.,2000,283-287:1116.
  • 3Hassanein A,Federici G,Konkashbaev I,et al.Materials Effects and Design Implications of Disruptions and Off-Normal Events in ITER [J].Fusion Eng.& Des.,1998,39-40:201.
  • 4Hino T,Akiba M.Japanese Develpments of Fusion Reactor Plasma Facing Components [J].Fusion Eng.& Des.,2000,49-50:97.
  • 5Nakamura K.Disruption Erosions of Various Kinds of Tungsten [J].Fusion Eng.& Des.,1998,39-40:295.
  • 6Benz R,Naoumidis A,Nickel H.Thermal Shock Testing of Ceramics with Pulsed Laser Irradiation [J].J.Nucl.Mater.,1987,150:128.
  • 7Wenman L S.Properties of Rapidly Solidified,Laser Surface Alloyed Low Carbon Steels [C].Application of Laser in Materials Processing [A].1979.
  • 8Arkhipov N I.Material Erosion and Erosion Products in Disruption Simulation Experiments at the MK-200UG Facility [J].Fusion Eng.& Des.,2000,49-50:151.
  • 9Linke J,Bolt H.Brittle Destruction of Carbon Based Materials under Severe Thermal Loads [J].Fusion Eng.& Des.,2000,49-50:235.
  • 10钱家溥,'96中国材料研讨会论文集,1998年,215页

共引文献31

同被引文献12

引证文献1

二级引证文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部