期刊文献+

Preparation technology and anti-corrosion performances of black ceramic coatings formed by micro-arc oxidation on aluminum alloys 被引量:9

Preparation technology and anti-corrosion performances of black ceramic coatings formed by micro-arc oxidation on aluminum alloys
下载PDF
导出
摘要 In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution. In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.
出处 《Rare Metals》 SCIE EI CAS CSCD 2006年第z2期146-149,共4页 稀有金属(英文版)
基金 This work was financially supported bythe Doctoral Foundation ofYanshan University(B41) theScience and Technology Foundation ofYanshan University(YDJJ0169).
关键词 aluminum alloy micro-arc oxidation black coating anti-corrosion performance aluminum alloy micro-arc oxidation black coating anti-corrosion performance
  • 相关文献

参考文献10

  • 1[1]Wirtz G.P.,Brown S.D.,and Kriven W.M.,Ceramic coating by anodic spark deposition/ Mater.Manuf.Process.,1991,6(1):87.
  • 2[2]Sun X.T.,and Jiang Z.H.,Composition and mechanical properties of hard ceramic coating containing α-Al2O3 produced by microarc oxidation on Ti-6Al-4V alloy.Thin Solid Films,2005,471(2):194.
  • 3[3]Wu H.H.,and Wang J.B.,Ultra-hard ceramic coatings fabricated through micro-arc oxidation on aluminum alloy.Applied Surface Science,2005,252(5):1545.
  • 4[4]Sun X.T.,Jiang Z.H.,Yao Z.P.,et al.,The effects of anodic and cathodic processes on the characteristics of ceramic coatings formed on titanium alloy through the MAO coating technology.Applied Surface Science,2005,252(2):441.
  • 5[5]Voevodin A.A.,Yerokhin A.L.,Lyubimov V.V.,et al.,Characterization of wear protective Al-Si-O coatings formed on Al-based alloys by micro-arc discharge treatment.Surface and Coatings Technology,1996,87:516.
  • 6[6]Curran J.A.,and Clyne T.W.,Thermo-physical properties of plasma electrolytic oxide coatings on aluminum.Surface and Coatings Technology,2005,199(2):168.
  • 7[7]Tian J.,Luo Z.Z.,Qi S.K.,et al.,Structure and anti-wear behavior of micro-arc oxidized coatings on aluminum alloy.Surface and Coatings Technology,2002,154:1.
  • 8[8]Yerokhin A.L.,Nie X.,Leyland A.,et al.,Plasma electrolysis for surface engineering.Surface and Coatings Technology,1999,122:72.
  • 9[9]Zheng H.Y.,Wang Y.K.,Li B.S.,et al.,The effects of Na2WO4 concentration on the properties of microarc oxidation coatings on aluminum alloy.Materials Letters,2005,59(2):139.
  • 10[10]Xue W.B.,Wang C.,Chen R.Y.,et al.,Structure and performance of ceramic coating deposited on ZL101 casting aluminum alloy by microarc oxidation.Transactions of Materials and Heat Treatment,2003,24(2):20.

同被引文献131

引证文献9

二级引证文献48

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部