Sinterability of Zirconia Top Coat of Investment Mold for Ti Alloy 被引量：1

Sinterability of Zirconia Top Coat of Investment Mold for Ti Alloy

下载PDF

导出

摘要 In this paper. zirconia is used as top mold material for Ti investment casting. Top mold samples are made by proper mold building technology. The effect of different sintering temperature on chemical composition, microstructure and residual bending strength of the top mold sample is Studied. The volume and homogeneity of the air holes in the top mold are determined by sintering temperature. and finally determined the residual bending strength of the mold sample was determined. In this paper. zirconia is used as top mold material for Ti investment casting. Top mold samples are made by proper mold building technology. The effect of different sintering temperature on chemical composition, microstructure and residual bending strength of the top mold sample is Studied. The volume and homogeneity of the air holes in the top mold are determined by sintering temperature. and finally determined the residual bending strength of the mold sample was determined.

作者 Yuyong CHEN Xiumei QI Xuezhu MA Huiguang WANG and Jing TIAN School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China

出处《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2001年第1期71-72,共2页 材料科学技术（英文版）

基金 Tnts work was sureorted ac Outstanding abuts dation of Harbin institute Of Twhnology (No.99004)

关键词 MOLD Ti Sinterability of Zirconia Top Coat of Investment Mold for Ti Alloy

分类号 TG13 [一般工业技术—材料科学与工程]

引文网络
相关文献

参考文献3

1[1]D.S.Reed and M.L.Jones: AFS Trans., 1991, 169, 697.
2[2]H.G.Wang and X.M.Qi: Acta Metall. Sin. (English Letters), 2000, 13, 746.
3[3]Guangzhi CUI and Zhenzhong XU: J. Mater. Eng.,1996, 3, 14. (in Chinese)

同被引文献18

1熊炳昆.锆的核性能及其在核电工业中的应用[J].稀有金属快报,2005,24(3):43-44. 被引量：11
2Liu Aihui,Li Bangsheng,Nan Hai,Sui Yanwei,Guo Jingjie,Fu Hengzhi.Interaction between γ-TiAl alloy and zirconia[J].China Foundry,2008,5(1):44-46. 被引量：6
3王帅,范洪远,周长春,张立杰,应诗浩.含铌锆合金熔炼工艺的研究[J].热加工工艺,2008,37(9):15-18. 被引量：5
4高永辉,李重河,国子明,庞威,鲁雄刚,丁伟中,钟庆东.TiNi合金熔炼的耐火材料研究[J].过程工程学报,2010,10(S1):63-67. 被引量：7
5王京津.高温合金的真空熔模精密铸造[J].火箭推进,1998,24(5):1-12. 被引量：4
6李文芳,黄小忠,杨兵初,杜作娟,唐明成.氧化铍陶瓷的应用综述[J].轻金属,2010(2):20-23. 被引量：12
7刘爱辉,李邦盛,隋艳伟,郭景杰.液态金属与陶瓷界面润湿性的研究进展[J].热加工工艺,2010,39(24):90-93. 被引量：5
8郑文裕,陈潮钿,陈仲丛.二氧化锆的性质、用途及其发展方向[J].无机盐工业,2000,32(1):18-20. 被引量：56
9孙国成,周邦新,姚美意,谢世敬,李强.锆合金在LiOH水溶液中腐蚀的各向异性研究[J].金属学报,2012,48(9):1103-1108. 被引量：14
10张钊,朱凯亮,刘岚洁,鲁雄刚,吴广新,李重河.BaZrO3坩埚的制备及与钛合金熔体的界面反应[J].硅酸盐学报,2013,41(9):1278-1283. 被引量：30

引证文献1

1李宝同,陈光耀,康菊芸,Ali Wajid,秦子威,鲁雄刚,李重河.锆合金精密铸造及熔炼用耐火材料的研究现状[J].钛工业进展,2017,34(1):6-11. 被引量：2

二级引证文献2

1马明亮,朱珍彪,王树军,杨学东,刘茵琪.国内锆合金及其铸造工艺的研究进展[J].铸造技术,2020,41(10):986-989. 被引量：3
2王刚,王来稳,袁波,杜鹏辉,冯海霞,柳军,王曲,吴昊,张琪.高温合金精密铸造用坩埚的研究进展[J].耐火材料,2023,57(5):442-445.

1LIANG, GX,LI, ZC,WANG, E.Microstructure and Mechanical Properties of Al-4.9Ni-4.9Ti Alloy Prepared by Mechanical Alloying[J].Journal of Materials Science & Technology,1995,11(3):209-212.
2Guo Jingjie, Su Yanqing, Liu Yuan, Ding Hongsheng, Ren Zhijiang and Jia JunSchool of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P. R. China.A MOLD MATERIAL USED FOR TITANIUM-ALUMINUM ALLOY-CALCIA[J].中国有色金属学会会刊：英文版,1998,8(2):41-45. 被引量：1
3Zhao Ertuan,Kong Fantao,Chen Yanfei,Chen Ruirun,Chen Yuyong.Characterization of zirconia-based slurries with different binders for titanium investment casting[J].China Foundry,2012,9(2):125-130. 被引量：4
4李邦盛,蒋海燕,李志强,范洪波,安阁英.Thermophysical and Mechanical Properties of ZrO_2 (CaO) Powder and Colloidal Zirconia Sol Dip-Coat Layer Used for Titanium Investment Casting[J].Journal of Harbin Institute of Technology(New Series),1999,6(2):16-19.
5H.G. Wang, X.M. Qi, J. Tian, W.Q. Zha, G.S. Liang, Y. Y. Chen and J. Jia National Key Laboratory of Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin 150001, China.EFFECTS OF OXIDES IN INVESTMENT MOLD ON SURFACE PROPERTIES OF TITANIUM CASTINGS[J].Acta Metallurgica Sinica(English Letters),2000,13(2):746-752. 被引量：9
6Wang Tao,Jin Zhanpeng (Department of Materials Science and Engineering, Central South University of Technology, Changsha 410083, China).THERMODYNAMIC ASSESSMENT OF THE ZrO_2-AIO_(1.5) SYSTEM[J].Journal of Central South University,1997,9(2):108-112. 被引量：1
7M. Naka,J. Zhang ,H. Y. Fang (1.Joining and Welding Research Institute, Osaka University, Japan 2)School of Materials Science and Engingeering, Harbin institute of Technology, Harbin 150001, China).EFFECT OF Ti CONTENT ON THE MICROSTRUCTURE AND PROPERTIES OF Si_3n_4/Si_3N_4 JOINT BRAZED USING Cu-Zn-Ti ALLOY[J].Acta Metallurgica Sinica(English Letters),2000,13(1):23-27.
8郑青军,周传华,李国勋,王瑞坤,詹峰,李国斌,孙丽虹.Influence of Microstructure Homogeneity on the Electrochemical Performance of Hydrogen Storage Alloys[J].Journal of Rare Earths,1998,16(4):27-31. 被引量：1
9汪明朴,杨杰,李周,王艳辉,王志伟.Crystalline structure and morphology of X phase in Cu Al-Ni-Mn-Ti alloy[J].中国有色金属学会会刊：英文版,2000,10(6):749-752.
10季彩霞,朱积寿,汪炳瑞.Recovery of Iridium from Waste Zirconia Sand[J].Rare Metals,1997,16(3):52-55.

Journal of Materials Science & Technology

2001年第1期

浏览历史

内容加载中请稍等...

Sinterability of Zirconia Top Coat of Investment Mold for Ti Alloy 被引量：1

参考文献3

同被引文献18

引证文献1

二级引证文献2

相关作者

相关机构

相关主题

浏览历史