期刊文献+

搅拌摩擦焊接缺陷的补焊方法 被引量:11

Study of repair welding technology of friction stir welding defects
下载PDF
导出
摘要 搅拌摩擦焊接方法在某些条件下也会造成焊接缺陷的产生,其中对接头性能有显著影响的缺陷包括沟槽、孔洞和未焊合.针对这三种类型的缺陷,用搅拌摩擦焊接方法进行补焊,以此研究补焊接头的焊缝成形和力学性能.结果表明,采用搅拌摩擦补焊方法能够消除沟槽、孔洞和未焊合等搅拌摩擦焊接缺陷;在优化的补焊工艺参数下,能够获得焊缝成形良好的补焊接头,其性能与优质原始接头的性能相当;补焊接头在拉伸测试中均在焊缝的后退侧发生断裂,拉伸断口具有明显的韧窝特征. Welding defects can be also formed during friction stir welding under improper welding technology conditions, and the friction stir welding defects such as groove, void and kissing bond significantly influence the mechanical properties of joints. Friction stir welding process is utilized to repair these defects, and the focus is placed on the weld morphology and mechanical properties of the repaired joints. The experimental results indicated that the friction stir welding process can remove the above-mentio...
出处 《焊接学报》 EI CAS CSCD 北大核心 2009年第1期1-4,113,共5页 Transactions of The China Welding Institution
基金 哈尔滨工业大学优秀团队支持计划项目资助 国家科技支撑计划重点项目(2006BAF04B09)
关键词 搅拌摩擦焊接 焊接缺陷 补焊 焊缝成形 力学性能 friction stir welding welding defect repair welding weld morphology mechanical property
  • 相关文献

参考文献5

  • 1JOELJ D.The friction stir welding advantage[].Welding Journal.2001
  • 2Mishra,R. S.,Ma,Z. Y.Friction Stir Welding and Processing[].Journal of Materials Science.2005
  • 3Johnsen M R.Friction stir welding takes off at Boeing[].Welding Journal.1999
  • 4J. P. Immarigeon,R. T. Holt,A. K. Koul,et al.Light weight materials for aircraft applications[].Materials Characterization.1995
  • 5Leonard A J,Lockyer S A.Flaws in friction stir welds[].International Symposium on Friction Stir Welding.2003

同被引文献77

引证文献11

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部