期刊文献+

微波烧结硬质合金辊环谐振腔设计及仿真 被引量:1

Microwave Resonator Design and Simulate of Cemented Carbide Roll Rings
下载PDF
导出
摘要 针对硬质合金辊环的微波烧结工艺,探讨其谐振腔的设计,通过分析腔体尺寸场对微波场分布形态及场强的影响,确定符合辊环外形特征的微波场结构及其谐振腔尺寸;应用电磁有限元仿真分析软件HFSS对腔内场结构进行仿真分析,依据仿真结果对腔体尺寸进行修正。结果表明,改进后的TE311模场圆柱腔,能实现微波烧结内径为100 mm,外径为190 mm,高度小于70 mm硬质合金辊环。 According to the microwave sintering process,the resonant cavity was designed.The microwave field structure of the compliance roller ring shape feature and the size of its resonant cavity were determined by analyzing the size of microwave cavity field distribution patterns and the impact of field strength.The influence of resonant cavity size on field distribution patterns was analyzed and the field strength was improved based on the simulation results of analyzing the cavity field structure by HFSS.The results show that the improved TE311 mode field cylindrical cavity can realize microwave sintering for the carbide roll ring with inner diameter of 100 mm,outer diameter of 190 mm and height of lower than 70 mm.
作者 刘飞飞 肖潇
出处 《中国粉体技术》 CAS 北大核心 2013年第4期27-31,共5页 China Powder Science and Technology
关键词 微波烧结 谐振腔 硬质合金辊环 电磁场分析 microwave sintering resonator cavity cemented carbide roll ring magnetic field analysis
  • 相关文献

参考文献9

  • 1杨逸斐,王兴庆,黄英华,何宝山,郭海亮.超细硬质合金烧结方法与抑制剂的研究[J].上海有色金属,2004,25(4):156-162. 被引量:16
  • 2张世磊,郭姗姗,王磊,齐恩磊,王介强.微波均相合成Ce_(0.75)Zr_(0.25)O_2粉体及其烧结性[J].中国粉体技术,2012,18(3):36-39. 被引量:1
  • 3SUNIL B R,SIVAPRAHASAM D,SUBASRI R. Microwave sintering of nanocrystalline WC-12Co:challenges and perspectives[J].International Journal of Refractory Metals & Hard Materials,2010,(02):180-186.
  • 4VAIDHYANATHAN B,ANNAPOORANI K,BINNER J. Microwave sintering of multilayer integrated passive devices[J].Journal of the American Ceramic Society,2010,(08):2274-2280.
  • 5易建宏,罗述东,唐新文,李丽娅,彭元东,杜鹃.金属基粉末冶金零件的微波烧结机理[J].粉末冶金材料科学与工程,2002,7(3):180-184. 被引量:8
  • 6张惠娟;杨文荣;李玲玲.工程电磁场与电磁波基础[M]北京:机械工业出版社,2009271-272.
  • 7李明洋.HFSS电磁仿真设计应用详解[M]北京:人民邮电出版社,2010268-268.
  • 8雷虹;余恬;刘立国.电磁场与电磁波[M]北京:北京邮电大学出版社,2008163-164.
  • 9金建铭;王建国.电磁场有限元方法[M]西安:西安电子科技大学出版社,19981-21.

二级参考文献35

共引文献22

同被引文献16

  • 1杨晓庆,黄卡玛.微波与化学反应相互作用中的关键问题讨论[J].电波科学学报,2006,21(5):802-809. 被引量:16
  • 2Hunsom M, Pruksathorn K, Damronglerd S. Electro- chemical treatment of heavy metals ( Cu2 , Cr6+ , Ni2 ) from industrial effluent and modeling of copper reduction [J]. Water Research, 2005, 39(4): 610-616.
  • 3Lu A H, Zhong S J, Chen J. Removal of Cr (VI) and Cr (III) from aqueous solutions and industrial wastewaters by natural clino-pyrrhotite [ J ]. Environ Sci Technol 2006, 40(9) : 3064-3069.
  • 4Zhang W C, Huang K M. Microwave heating for Debye media considering instability of magnetron [ J ]. Journal of Sichuan University (Natural Science Edition), 2014, 51(5) : 983-990.
  • 5lumbaev E B, Semenov V E, Rybakov K I. Stability of microwave heating of ceramic materials in a cylindrical cavity[ J]. Journal of Physics D-Applied Physics, 2007, 40(21 ) : 6809-6817.
  • 6Guan Y, Nikawa Y. Measurement of temperature-depend- ent complex permittivity for materials using cylindrical re- sonator under microwave irradiation [ J]. Electronics and Communications in Japan Part II-Electronics, 2007, 90 (11): 1-8.
  • 7郭庆功,唐蜜,黄卡玛.基于非相干合成的圆柱腔微波化学反应器设计[J].压电与声光,2008,30(2):17-19.
  • 8Zhao C, Vleugels J, Groffils C, Luypaert P J, Biest 0 V D. Hybrid sintering with a tubular susceptor in a cylindri- cal single-mode microwave furnace [ J ] , Acta Materialia, 2000, 48(14) : 3795-3801.
  • 9吴彦军,张林楠,李振山.重金属废水无害化处理技术最新进展[J].工业水处理,2009,29(3):1-3. 被引量:25
  • 10彭金辉,刘秉国,张利波,周俊文,夏洪应,张泽彪.高温微波冶金反应器的研究现状及发展趋势[J].中国有色金属学报,2011,21(10):2607-2615. 被引量:25

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部