期刊文献+

含硼不锈钢A887 304B7麻点质量问题的分析探讨 被引量:3

Investigation and Analysis for Stains Appeared on Boron Stainless Steel A887 304B7
下载PDF
导出
摘要 本文对核电站设备乏燃料储存架材料含硼不锈钢A887 304B7出现麻点质量问题进行调查、分析,分别考虑材料,环境的影响,进行了假设分析及试验验证,最终找到氯是产生麻点的根本原因。成功通过配制溶液浸洗有麻点的含硼不锈钢的方法解决了该质量问题,制定有效的改进措施,杜绝了麻点问题的再次产生,确保了设备质量,对实际生产有一定的参考价值。 Investigation and analysis were carried out for un-expectable stains in the boron stainless steel A887 304B7on spent fuel storage rack of nuclear power plant.Considering the impacts by materials and environment,respectively,an assumption analysis and experimental verification were conducted.Finally,it was found that chlorine was the root cause of the un-expectable stains.Through immersing the stained boron stainless steel in a particular solution,the stains were successfully cleaned.Some effective measures were further taken to completely eradicate stain reappearance.In terms of ensuring the qualities of materials and equipment,the results and conclusions would provide a certain guiding reference to the manufacturing.
作者 杨志 邓玉冬
出处 《材料科学与工程学报》 CAS CSCD 北大核心 2014年第2期280-283,共4页 Journal of Materials Science and Engineering
关键词 表面质量 含硼不锈钢 麻点 环境 surface quality boron stainless steel stains environment chlorine
  • 相关文献

参考文献4

二级参考文献8

  • 1李鹤林.油气输送钢管的发展动向与展望[J].焊管,2004,27(6):1-11. 被引量:123
  • 2Maitrepierre P, Thivellier D, Tricot R. Influence of Boron on the Decomposition of Austenite in Low Carbon Alloyed Steels [J]. Metallurgical Transactions, 1975,6 A : 287.
  • 3WANG X M, HE X L. Effect of Boron Addition on Structure and Properties of Low Carbon Bainitie Steels [J]. ISIJ International, 2002,42 (supplement) : S38.
  • 4Krauss G, Thompson S W. Ferritic Microstructures in Continuously Cooled Low and Ultralow Carbon Steels[J]. ISIJ International, 1995,35 (8) : 937.
  • 5Diaz-Fuentes M, Iza-Mendia A, Gutierrez I. Analysis of Different Acieular Ferrite Microstructure in Low Carbon Steels by Electron Backscattered Diffraction. Study of Their Toughness Behavior [J]. Metallurgical and Materials Transactions, 2003,34A : 2505.
  • 6Lambert-perlade A, Gourgues A F, Besson J. Mechanisms and Modeling of Cleavage Fracture in Simulated Heat-Affected Zone Microstructures of a High-Strength Low Alloy Steel [J]. Metallurgical and Materials Transaction,2004,35A: 1039.
  • 7Misra R D K, Nathani H, Hartmann J E, et al. Microstructural Evolution in a New 770 MPa Hot Rolled Nb-Ti Microalloyed Steel [J]. Materials Science and Engineering,2005, 394A:339.
  • 8倪志军,张向葵.采用TMCP工艺对高强度船体结构钢EH50的研究与开发[J].钢铁,2009,44(5):48-51. 被引量:8

共引文献7

同被引文献26

引证文献3

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部