摘要
A series of selective solar absorber coatings of Cr-Cr2O3 were deposited in different content on stainless steel by plasma spraying.The samples were annealed at different temperatures.The optical performance(both the solar absorptance and the thermal emittance)were studied by spectrophotometry.The surface morphology,the structure and the surface roughness were investigated by scanning electron microscopy(SEM),X-ray diffraction(XRD),and roughmeter respectively.The results show that,as the content of Cr increased,the solar absorptance(α)decreased greatly,from 0.91 to 0.84.Meanwhile,the thermal emittance(ε) decreased more greatly,from 0.86 to about 0.64.The ratio between the solar absorptance and the thermal emittance increased from 1.06 to 1.31.Annealing had a great impact on the optical performance.Annealing temperature is an important element.But its influence was a little complex.To pure Cr coating,annealing at 500℃ was a perfect chosen,where the ratio between the solar absorptance and the thermal emittance was highest of 1.46.
A series of selective solar absorber coatings of Cr-Cr2O3 were deposited in different content on stainless steel by plasma spraying.The samples were annealed at different temperatures.The optical performance(both the solar absorptance and the thermal emittance)were studied by spectrophotometry.The surface morphology,the structure and the surface roughness were investigated by scanning electron microscopy(SEM),X-ray diffraction(XRD),and roughmeter respectively.The results show that,as the content of Cr increased,the solar absorptance(α)decreased greatly,from 0.91 to 0.84.Meanwhile,the thermal emittance(ε) decreased more greatly,from 0.86 to about 0.64.The ratio between the solar absorptance and the thermal emittance increased from 1.06 to 1.31.Annealing had a great impact on the optical performance.Annealing temperature is an important element.But its influence was a little complex.To pure Cr coating,annealing at 500℃ was a perfect chosen,where the ratio between the solar absorptance and the thermal emittance was highest of 1.46.
出处
《稀有金属材料与工程》
SCIE
EI
CAS
CSCD
北大核心
2012年第S1期315-318,共4页
Rare Metal Materials and Engineering
基金
"863"HI-TECK project of China(2009AA05Z440)
