期刊文献+

RTM复合材料单搭接头力学性能研究 被引量:2

Mechanical Properties of RTM Composite Single-lap Joints
下载PDF
导出
摘要 在常温环境下,进行了RTM成型工艺制备的复合材料单搭接头的剪切强度实验,记录并处理了实验数据;根据实验现象分析了单搭接头的破坏机理;建立了RTM复合材料单搭接头的三维(3D)有限元模型,模拟了搭接头的拉伸剪切破坏过程,并预测了搭接头破坏位置与破坏载荷,预测结果与实验现象吻合良好。 Shearing experiments were carried out to investigate mechanical properties of composite single-lap joints,processed by using the RTM techniques,and failure mechanism was discussed from experimental observation.Three-dimensional finite element(3D FE)models were generated to provide an insight into failure locations and mechanism of RTM composite single-lap joint.The failure location and process were predicted,demonstrating a good agreement between the predictions from 3D FEM and experiments.
出处 《材料工程》 EI CAS CSCD 北大核心 2009年第S2期32-36,39,共6页 Journal of Materials Engineering
基金 航空基金资助项目(05A51011)
关键词 复合材料 树脂转移模塑(RTM) 单搭接头 力学性能 有限元 ANSYS composites resin transfer molding(RTM) single-lap joint mechanical property finite element analysis ANSYS
  • 相关文献

参考文献13

  • 1曾竟成,尹昌平,刘钧.软模辅助RTM成型舱段构件及其性能研究[J].材料工程,2006,34(6):28-32. 被引量:6
  • 2孙德新,游敏,廖湘辉.单搭接接头断续胶层中应力分布的数值分析[J].三峡大学学报(自然科学版),2003,25(6):541-544. 被引量:8
  • 3吴晓青,李嘉禄,焦亚男.复合材料胶接方式的设计[J].纺织学报,2003,24(4):92-94. 被引量:11
  • 4Kum Cheol Shin,Jung Ju Lee.Fatigue characteristics of a co-cured single lap joint subjected to cyclic tensile loads[J]. Journal of Adhesion Science and Technology . 2002 (4)
  • 5Kum Cheol Shin,Jung Ju Lee.Tensile load-bearing capacity of co-cured double lap joints[J]. Journal of Adhesion Science and Technology . 2000 (12)
  • 6Kum Cheol Shin,Jung Ju Lee,Dai Gil Lee.A study on the lap shear strength of a co-cured single lap joint[J]. Journal of Adhesion Science and Technology . 2000 (1)
  • 7HART-SMITH LJ.Adhesive Bonded Scarf and Stepped Lap Joints. NASA Report CR-112237 . 1973
  • 8JARRY E,SHENOI RA.Performance of butt strap joints for marine applications. International Journal of Adhesion&Ad-hesives . 2006
  • 9NARASI MHAN S,SHENOI R A,JEONG H K.Three-dimen-sional stresses in adhesively bonded lap joints with non-identical adherends. Journal of Materials:Design and Applications . 2004
  • 10LEE J J,SHI N K C,LEE D G.Study on the lap shear strength of a co-cured singlelapjoint. Adhesion Sci Technol . 2000

二级参考文献25

共引文献22

同被引文献22

  • 1赵丽滨,秦田亮,黄海,梁宪珠,曹正华.某复合材料π接头的强度估算[J].材料工程,2007,35(z1):90-93. 被引量:8
  • 2肖丽华,杨桂.三维编织多功能结构复合材料的发展[J].复合材料学报,1994,11(2):23-27. 被引量:12
  • 3李军,薛明德.旋转周期复合材料层合结构的有限元屈曲分析[J].复合材料学报,2005,22(3):150-155. 被引量:5
  • 4侯海量,谷云辉,朱锡,刘润泉.爆炸复合接头剪切强度测试方法研究[J].海军工程大学学报,2006,18(1):98-102. 被引量:4
  • 5BLAKE J I R, SHENOI R A, HOUSE J, et al. Progressive damage analysis of tee-joints with vis- coelastic inserts [J]. Composites, Part A, Appl. Sci.& Manufacturing, 2001,32(5) :641-653.
  • 6DHARMAWAN F, LI H C H, HERSZBERG I, et al. Applicability of the crack tip element analy sis for damage prediction of composite T-joints [J]. Composite Structures, 2008,86(1-3) :61-68.
  • 7CHRISTIAN B, CHRISTIAN L L, KASPER K, et al. Improving performance of polymer fiber re- inforced sandwich X-joint in naval vessels Part I: Design aspect EC// The 16th International Con- ference on Composite Materials. Kyoto: IEEE, 2007.
  • 8GU H Z, WANTHAT S. Progressive failure ana- lysis of composite rt joint [C]//Struct Dynamics & Materials Conf. Florida: IEEE, 2010.
  • 9FEIH S, SHERCLIFF H R. Adhesive and com- posite failure prediction of single-L joint structures under tensile loading [J]. Int. J. Adhesion Ad- hesives, 2005,25(1) :47-59.
  • 10FEIH S, SHERCLIFF H R. Composite failure prediction of single-L joint structures under ben- ding [J]. Composites Part A: Appl. Sci. Ma- nufacturing, 2005,36(3) :381-395.

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部