期刊文献+

海上风电机组吸力式桶形基础承载力分析与设计 被引量:29

Analysis and design of bearing capacity of suction caisson foundations of offshore wind turbines
原文传递
导出
摘要 吸力式桶形基础由于施工方便的优势将成为海上风电机组的一种重要基础型式。针对海上风电机组承受巨大倾覆弯矩荷载的受荷特性,基于单桶基础模型试验获得的变形模式和桶-土相互作用力,提出了单桶基础基于变形控制的倾覆弯矩承载力分析方法,突破了现有基于极限状态的承载力分析方法;基于多桶基础模型试验及相应的排水状况分析,提出了多桶基础倾覆弯矩承载力分析方法。从而为海上风机吸力式单桶基础和多桶基础承载力分析提供了有效方法。桶体高宽比和直径及单桶直径和桶间距分别决定了风机单桶和多桶基础的倾覆弯矩承载力。在一次典型风暴潮下,粉土地基中风机多桶基础桶内的负压来不及消散,其承载力可按不排水情况进行分析,此时桶内负压的存在将大幅提高多桶基础的整体抗倾覆性能。最后将所提出的承载力分析方法应用于某典型海上风机的基础设计中,供类似工程借鉴参考。 The suction caisson foundation is an important option for offshore wind turbines owing to its advantages of quick and convenient installation.With regard to the load characteristics of offshore wind turbines subjected to huge overturning moment loading,an approach for overturning bearing capacity of the mono-caisson based on deformation is proposed according to the model tests deformation mode and the soil-structure interaction of the mono-caisson foundation.The approach is different from the existing approaches for the ultimate bearing capacity.An approach for the overturning bearing capacity of multi-caisson foundations is also presented based on the multi-caisson model tests.The overturning bearing capacity of the mono-caisson is decided by the aspect ratio and the diameter,while that of the multi-caisson is depended on the diameter of the caisson and the spacing between the caissons.During a typical storm,the suction inside the caisson in silt is unable to dissipate.Thus its moment capacity can be analyzed as that under the undrained condition.The negative pressure will cause a substantial increase in the capacity of multi-caisson foundation against overturning moment.A typical wind turbine is taken as an example to carry out the calculation and design work utilizing the approaches mentioned above.This study can be a reference for similar real projects.
出处 《岩土工程学报》 EI CAS CSCD 北大核心 2013年第S1期443-450,共8页 Chinese Journal of Geotechnical Engineering
基金 国家自然科学基金项目(51179169 50979097) 中央高校基本科研业务费专项资金项目(2012FZA4019) 浙江省重点创新团队支持计划项目(2009R50050)
关键词 风电机组 吸力式桶形基础 单桶 多桶 弯矩承载力 设计 wind turbine suction caisson mono-caisson multi-caisson bending moment capacity design
  • 相关文献

参考文献11

  • 1朱斌,孔德琼,童建国,孔令刚,陈仁朋.粉土中吸力式桶形基础沉贯及抗拔特性试验研究[J].岩土工程学报,2011,33(7):1045-1053. 被引量:32
  • 2Zhu B,Kong D. Q,Chen R. P,Kong L. G,Chen, Y. M.Installation and lateral loading tests of suction caissons in silt. Canadian Geotechnical Journal . 2011
  • 3Kenneth Peire,Hendrik Nonneman,Eric Bosschem.Gravity base foundations for the thornton bank offshore wind farm. Terra et Aqua . 2009
  • 4Kelly, R. B,Houlsby, G. T,Byrne, B. W.A comparison of field and laboratory tests of caisson foundations in sand and clay. Geotechnique . 2006
  • 5Zhu B,Byrne B. W,Houlsby G. T.Long term lateral cyclic response of suction caisson foundations in sand. Journal of Geotechnical and Geoenvironmental Engineering . 2013
  • 6Zhang L Y.Nonlinear analysis of laterally loaded rigidpiles in cohesionless soil. Computers and Geotechnics . 2009
  • 7Reese L. C,Cox W. R,Koop F. D.Analysis of laterally loaded piles in sand. Proc.6th Annual Offshore Technology Conf . 1974
  • 8CHRISTIAN L.Design of Offshore Wind Turbine SupportStructures:Selected topics in the field of geotechnicalengineering. . 2004
  • 9VILLALOBOS F A.Model testing of foundations for offshorewind turbines. . 2006
  • 10KUO Y S,ACHMUS M,ABDEL-RAHMAN K.Minimumembedded length of cyclic horizontal loaded monopiles. Journal of Geotechnical and Geoenvironmental Engineering,ASCE . 2012

二级参考文献28

  • 1张金来,鲁晓兵,王淑云,时忠民,张建红.桶形基础极限承载力特性研究[J].岩石力学与工程学报,2005,24(7):1169-1172. 被引量:29
  • 2王晖,王乐芹,周锡礽,肖仕宝.软黏土中桶形基础的上限法极限分析模型及其计算[J].天津大学学报,2006,39(3):273-279. 被引量:12
  • 3矫滨田,鲁晓兵,赵京,时忠民.吸力式桶形基础抗拔承载力特性试验研究[J].中国海洋平台,2006,21(3):27-30. 被引量:12
  • 4栾茂田,范庆来,杨庆.非均质软土地基上吸力式沉箱抗拔承载力数值分析[J].岩土工程学报,2007,29(7):1054-1059. 被引量:22
  • 5BYE A, ERBRICH C, EARL K. Geotechnical design of bucket foundation[C]//OTC7793, 1995:869 - 883.
  • 6HOULSBY G T, BYRNE B W. Design procedures for installation of suction caisson in sand[J]. Geotechnical Engineering, 2005, 158(3): 135 - 144.
  • 7SENDERS M, RANDOLPH M F. CPT-Based method for the installation of suction caissons in sand[J]. Journal of Geotechnical and Geoenviromental Engineering, 2009, 1(14): 14 - 25.
  • 8FELD T. Suction buckets, a new innovative foundation concept, applied to offshore wind turbines[D]. Aalborg: Aalborg Univ, 2001.
  • 9范庆来.滩海吸力式桶形基础承载力特性研究[D].大连:大连理工大学,2007.
  • 10BYRNE B W, HOULSBY G T. Experimental investigations of the response of suction caissons to transient vertical loading[J]. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 2004, 128(11): 926 - 939.

共引文献31

同被引文献240

引证文献29

二级引证文献96

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部