期刊文献+

PA66/UHMWPE合金的力学性能和微观结构研究 被引量:3

Study on Mechanical Properties and Microstructure of PA66/UHMWPE Alloy
下载PDF
导出
摘要 制备了PA66/UHMWPE/HDPE g MAH共混合金 ,并对其力学性能和微观结构进行了研究。结果表明 ,随着UHMWPE质量分数的增加 ,共混合金常温和低温下的缺口冲击强度都显著提高 ,拉伸强度和拉伸模量下降 ,但仍能保持较高的力学性能 ;添加了UHMWPE的PA66合金的断裂面有大量的空穴产生和应力发白现象。 PA66/UHMWPE/HDPE-g-MAH alloy was prepared,and the structure and mechanical properties of the prepared alloy were studied. The results indicated that the notched Izod impact strength at room temperature and cryogenic temperature increased obviously,the tensile strength and tensile modulus decreased,while the mechanical properties of the alloy maintained at a good level with the increase of the mass fraction of UHMWPE. The toughening mechanism of the alloy was studied by means of SEM,it was found there was a great deal of cavity and stress-whitening in the fracture surface of the PA66/UHMWPE alloy.
出处 《塑料工业》 CAS CSCD 北大核心 2004年第7期13-15,共3页 China Plastics Industry
关键词 尼龙66/超高摩尔质量聚乙烯合金 HDPE-G-MAH PA66/UHMWPE Alloy HDPE-g-MAH
  • 相关文献

参考文献9

二级参考文献14

  • 1丁洁.塑料应用技术[M].北京:化学工业出版社,1994..
  • 2KIM B K,DO I H.Particles versus fibrillar morphology in polyolefin ternary blends[].Journal of Applied Polymer Science.1996
  • 3MIN K,WHITE J L.Development of phase morphology in incompatible polymer blends during mixing and its variation in extrusion[].Polymer Engineering and Science.1984
  • 4WU S.Polymer Interface and Adhesion[]..1982
  • 5TSEBRENKO M V,REZANOVA N M.Rheology of molten blends of polyoxymethylene and ethylene-vinyl acetate copolymer and the microstructrue of extrudates as a function of their melt viscosities[].Polymer Engineering and Science.1980
  • 6UTRACKI L A,DUMOULIN M M and TOMA P.Melt rheology of high density polyethylene/polyamide - 6 blends[].Polymer Engineering and Science.1986
  • 7WU S.Phase structure and adhesion in polymer blends: A criterion for rubber toughening[].Polymer.1985
  • 8WU S.Formation of dispersed phase in incompatible polymer blends: Interfacial and rheological effects[].Polymer Engineering and Science.1987
  • 9郭少云,王泽琼,冯金茂,徐僖.HDPE/尼龙-6/EAA共混体系反应增容作用的研究[J].高分子材料科学与工程,1997,13(5):114-118. 被引量:10
  • 10刘卫平.PA6/POE超韧合金的形态和性能[J].现代塑料加工应用,1998,10(3):8-11. 被引量:21

共引文献23

同被引文献34

引证文献3

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部