期刊文献+

连续冷却条件下半固态AZ91D合金的流变特性 被引量:2

Rheological Behavior of Semi-solid AZ91D Alloy Cooled Continuously
下载PDF
导出
摘要 在Couette型同轴双桶流变仪上对半固态AZ91D合金浆料的流变性能以及组织进行了研究 ,结果表明 :连续冷却条件下 ,半固态AZ91D合金浆料的表观粘度与冷却速率有很大的关系 ,低冷速下的表观粘度低于高冷速下的表观粘度 ;连续冷却条件下 ,半固态AZ91D合金浆料的表观粘度还受剪切速率的影响 ,随剪切速率的增高 ,浆料的表观粘度降低 ;连续搅拌半固态AZ91D合金浆料的组织与冷却速率和剪切速率有关 。 The rheological behavior and microstructure of semi-solid AZ91D when continuously cooled is studied using a Couette type viscometer in the present paper. The results show that the apparent viscosity of semi-solid AZ91D increases with the cooling rate increasing when continuously cooled and mechanical stirred and the empiric relation of the apparent viscosity with the cooling rate and solid fraction at shearing rate 93.7s^(-1) is expressed as , that the apparent viscosity of semi-solid AZ91D increases with the shearing rate increasing when continuously cooled and mechanical stirred and the empiric relation of the apparent viscosity with the shearing rate and solid fraction at cooling rate 4 ℃/min is showed as, that the cooling rate and shearing rate have important effect on the microstructure of the semi-solid AZ91D alloy slurry when continuously cooled and mechanical stirred, and decreasing the cooling rate and increasing the shearing rate are favorable to the non-dendritic evolution of the primary grains.
出处 《铸造技术》 CAS 北大核心 2004年第9期706-709,共4页 Foundry Technology
基金 国家重点基础研究发展规划项目 863计划项目 编号 :G2 0 0 0 0 672 0 2 (- 3) G2 0 0 2AA3360 80
关键词 镁合金 流变性能 半固态 Magnesium alloys Rheological behavior Semi-solid
  • 相关文献

参考文献9

  • 1Bradley N L, Weiland R D, Achafer W J, et al. US Patent, No.5040589[P], 1989.
  • 2Frederick P S Bradley N L and Erickson S C. Injection Molding Magnesium Alloys[D]. Advanced Materials & Processes, 1988,134(4):53-56.
  • 3Decker R F, Carnahan R D, Vining R, et al. Progress in Thixomolding[M]. In: Kirkwood D H and Kapranos P. Proc of the 4th Int. Conf. on Semi-Solid Processing of Alloys and Compositions, the Universiy of Sheffield,England, June 19-21,1996. UK:the Department
  • 4Leng T. Thixosystem[M]. in: Chiarmetta G L and Rosso M. Proc. of the 6th Int. Conf. on Semi-Solid Processing of Alloys and Compositions, Turin, Italy,Sept 27th-29th,2000,Materials Science and Chemical Engineering Department, Politecnico DI Torino:215-220.
  • 5Peng Hs, Hsu WM. Development on Rheomolding of Magnesium Parts[M].ibid:313-317.
  • 6Ji S, Fan Z, Liu G, et al . Twin-Screw Rheomolding of AZ91D Mg-Alloy[M]. in:Tsutsui Y,Kiuchi M and Ichikawa. Proc. of the 7th Int. Conf. on Semi-Solid Processing of Alloys and Compositions,Tsukuba JAPAN,Sept 25th-27th,2002,National Institute of Advanced I
  • 7Spencer D and Flemings M C. Rheological Behavior of Sn-15%Pb in the Crystallization Range[M], Metall. Trans, 3, 1972: 1925.
  • 8Joly P A and Mehrabian R. The Rheology of a Partially Solid Alloy[M]. J. Mater. Sci.,1976(11):1393-1418.
  • 9Flemings M C. Solidification Processing[M]. The United States of American: McGraw-Hill Book Company, 1974: 34.

同被引文献49

引证文献2

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部