期刊文献+

生坯制备工艺参数对反应烧结SiC组织性能的影响 被引量:1

Influence of Processing Technological Parameters of Carbon Perform on Microstructure and Property of Reaction-Bonded SiC
下载PDF
导出
摘要 分析了生坯制备工艺参数对反应烧结SiC显微组织和性能的影响。结果表明:石油焦含量、石油焦和SiC粒径及成型压力影响生坯气孔率与碳含量的匹配,从而决定了反应烧结SiC材料的组织和性能。当石油焦加入量为ωC=10%,SiC和石油焦粒径为42μm。生坯成型压力为140MPa时,可获得最佳的组织及性能配合,材料的断裂强度和密度分别为310MPa和3.11g·cm-3。 The effect of the processing technological parameters on the microstructure and property of reaction-bonded SiC is studied.The results show that these parameters,i.e.carbon content,carbon and silicon carbide partical size and the shaped press value are critical in determining the final microstructure and property,because they have influences on the matching of green porosity and carbon content.The optimal structure and property of specimens can be obtained by manufacturing from 90% SiC of 42μm with 10% carbon of 42μm,and being pressed at 140 MPa.
出处 《河南科技大学学报(自然科学版)》 CAS 2004年第5期1-4,共4页 Journal of Henan University of Science And Technology:Natural Science
基金 国家自然科学基金资助项目(59772013)
关键词 反应烧结 生坯 石油焦 制备工艺 粒径 加入量 气孔率 组织性能 组织和性能 显微组织 Silicon carbide ceramics Sintering Microstructure Properties
  • 相关文献

参考文献8

  • 1吕振林,高积强,金志浩.碳化硅陶瓷材料及其制备[J].机械工程材料,1999,23(3):1-3. 被引量:17
  • 2杨刚宾,蔡序珩,乔冠军,金志浩.多孔陶瓷制备技术及其进展[J].河南科技大学学报(自然科学版),2004,25(2):99-103. 被引量:28
  • 3Popper P.The Preparation of Dense Self-Bonded Silicon Carbide[M].Heywood London:Special Ceramics,1960:209-219.
  • 4Forrost C W,Kemnnedy P,Shennan J V.The Fabrication and Properties of Self-bonded Silicon Carbide Bodies[Z].Popper P.Special Ceramics 5 UK,British Ceramic Research Association,1972:99-123.
  • 5Chinag Y,Messner P,Terwilliger C D.Reaction-Bonded Silicon Carbide[J].Mater Sci Eng,1991,A144:63-74.
  • 6Ness J N,Page T F.Microstructural Evolution in Reaction-Bonded Silicon Carbide[J].J Mater Sci.,1986,21:1377-1397.
  • 7Lim C B, Yano T, Iseki T.Microstructur and Mechnical Properties of RB-SiC/MoSi2 Composities[J].J Mater Sci,1989,24:4144-4151.
  • 8Zhou Hong,Singh Raj N Kinetics.Model for the Growth of Silicon Carbide by the Reaction of Liquid Silicon with Carbon[J].J Am Ceram Soc,1995,78(9):2456-2462.

二级参考文献11

共引文献42

同被引文献17

  • 1吉晓莉,鄢永高,武七德.掺加SiC片晶对反应烧结SiC性能的影响[J].武汉理工大学学报,2005,27(9):14-16. 被引量:6
  • 2周浩,张长瑞,魏巍,王瑶.全碳素坯密度对反应烧结SiC的影响[J].航空材料学报,2005,25(6):57-60. 被引量:7
  • 3陈日月,刘小磐.成型工艺对反应烧结SiC材料性能的影响[J].佛山陶瓷,2005,15(11):5-8. 被引量:5
  • 4Popper P. Special Ceramics. London : Heywood, 1960
  • 5Chiang Y M, Messner R P, Terwilliger C D, et al. Reaction - formed silicon carbide. Mater Sci and Engi A, 1991, 144:63 - 74
  • 6Mulay V N, Reddy N K, Jaleel M A. Preparation and properties of self- bonded silicon carbide .Trans Indian Ceram Soc, 1989, 48 (4) :73 - 75
  • 7Minnear W P. Interfacial energies in the Si - SiC system and the Si + C reaction.J America Cera Soc,1982,65(1) :C10 - C11
  • 8Messner R P, Chiang Y M. Processing of reaction - bonded silicon carbide without residual silicon phase. Cera Engi and Sci Proc, 1988, 9(7- 8):1053- 1059
  • 9Hase T, Suzuki H. Rise in temperature of SiC pellet involving reaction sintefing.J Nuel Mater, 1976, 59( 1 ) : 42 - 48
  • 10Ness J N, Page T F. Microstructural evolution in reaction - bonded silicon carbide. J Mater Sci, 1986, 21(4):1377 - 1397

引证文献1

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部