期刊文献+

螺旋布料叶片的生产

Process Technology for the Vane of Screw Auger Used in the Asphaltum & Concrete Paver
下载PDF
导出
摘要 使用高铬铸铁代替镍硬Ⅳ铸铁生产摊铺机螺旋布料叶片 ;采用底注式浇注系统并适当提高浇注温度以改善表面质量 ;增设压边冒口消除热节处缩孔、缩松 ;采用专用工装树脂砂造型进一步提高表面质量和生产效率。试验数据表明 。 High-Cr cast iron was used to produce the vane of screw auger used in the asphaltum and concrete paver instead of Ni-hard Ⅳ. The bottom gating system and higher pouring temperature were applied to improve the quality of the casting surface. The shrinkage defects could be avoided by using lip riser and exclusive equipments, as well as resin-bonded molding sand, were used for better quality and higher efficiency. Results show that immediate quenching decreases the properties of samples in some degree.
出处 《铸造技术》 CAS 北大核心 2004年第10期744-745,共2页 Foundry Technology
关键词 叶片 高铬铸铁 生产工艺 余热淬火 Vane High-Cr Cast Iron Production technology Remaining heat quenching
  • 相关文献

参考文献2

  • 1[1]G.Larid II. Microstructures of Ni-Hard Ⅰ, Ni-Hard Ⅳ and High-Cr White Cast Irons[J]. AFS Transactions,1991(55):339-357.
  • 2[2]R.L Pattyn. Heat Treatment of High-Cr White Irons[J]. AFS Transactions,1993(01):161-167.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部