期刊文献+

掺铝铬酸镧烧结过程的相变特征 被引量:4

Phase Transformation of Aluminum-Doped Lanthanum Chromite During Sintering Process
下载PDF
导出
摘要 用溶胶 凝胶法制备出铬酸镧超细粉体 ,然后掺入铝粉制成试样。用DSC和XRD等手段对掺铝铬酸镧烧结过程的相变进行研究。结果表明 ,掺铝La0 9Ca0 1CrO3烧结时铝首先熔化 ,然后与氧发生反应生成Al2 O3,后者发生晶型转变后再与La0 9Ca0 1CrO3反应生成六铝酸镧。掺铝烧结体密度较素坯有所减小 。 Super fine particles of lanthanum chromite were prepared by the sol-gel process,and then mixed with aluminum powder.Phase transformation of aluminum-doped lanthanum chromite during sintering was investigated by DSC and XRD.The results show that Al first melted and then reacted with oxygen to form Al_2O_3.After changes of crystal microstructure,Al_2O_3 reacted with La_(0.9)Ca_(0.1)CrO_3,resulting in the formation of lanthanum hexaaluminate.The density of sintered Aluminum-doped products is lower than that of undoped roughcast products,and the electrical resistivity increased remarkably with increasing the Al-doped amount.
出处 《金属热处理》 CAS CSCD 北大核心 2004年第10期4-7,共4页 Heat Treatment of Metals
基金 山东省中青年科学家基金 ( 0 2BS0 61) 国家自然科学基金 ( 5 0 3 62 0 0 1)
关键词 铬酸镧 烧结 相变 lanthanum chromite sintering phase transformation
  • 相关文献

参考文献11

  • 1孙良成,李胜利,刘伟明,敖青,李德辉.铬酸镧材料的研究现状及应用领域[J].稀土,2002,23(6):53-56. 被引量:15
  • 2王文,张海鸥,王桂兰.固体氧化物燃料电池连接板材料和制备工艺[J].能源研究与信息,2002,18(3):178-184. 被引量:7
  • 3刘晓梅,吕喆,刘江,裴力,何岚鹰,苏文辉.La_1-_xCa_xCrO_3连接材料的研制[J].中国稀土学报,1999,17(2):191-192. 被引量:7
  • 4[4]Amitava Chakraborty,Basu R N,Maiti H S.Low temperature sintering of La(Ca)CrO3 prepared by an autoignition process[J].Materials Letters,2000,45:162.
  • 5[5]Sakai N, Kawada T, Yokokawa H,Dokiya M and Kojima I.Liquid-Phase-Assisted Sinter of Calcium-Doped Lanthanum Chromites[J].Journal of the American Ceramic Society,1993,76 (3):609.
  • 6尹卓湘.铝合金中气体反应行为[J].贵州工业大学学报(自然科学版),1998,27(6):39-45. 被引量:4
  • 7[8]MacKenzie K J D,Schmucker M,Mayer L.Evolution of crystalline aluminates from hybrid gel-derived precursors studied by XRD and multinuclear solid state MAS NMR III.Lanthanum hexaaluminate,LaAl11O18[J].Thermochimica Acta.,1999,335:73.
  • 8张炜,曹泰岳,王宁飞,张为华,朱慧.铝粉颗粒燃烧及其燃烧产物凝聚成核计算研究[J].固体火箭技术,1997,20(2):43-47. 被引量:8
  • 9[10]Kirchnerova J,Klvana D.Design criteria for high-temperature combustion catalysts[J].Catal Lett.,2000,67:175.
  • 10[11]Gasperin M,Saine M C,Kahn A,et al.Influence of M2+ ions substitution on the structure of lanthanum hexaaluminates with magnetoplumbites structure[J].J. Solid State Chem.,1984,54:61.

二级参考文献23

  • 1曹泰岳,张为华,王宁飞.轻金属颗粒燃烧理论研究进展[J].推进技术,1996,17(2):82-87. 被引量:11
  • 2Minh N Q, Takehiko Takahashi. Science and technology of ceramic fuel cell[M]. Tokyo: Elsevier, 1995. 165-188.
  • 3Singhal S C. Advances in solid oxide fuel cell technology[J]. Solid State Ionics, 2000, 135: 305-313.
  • 4Badwal S P S. Stability of solid oxide fuel cell components[J]. Solid State Ionics, 2001, 143: 39-46.
  • 5Mori Masashi, Sammes Nigel M. Sintering and thermal expansion characterization of Al-doped and Co-doped lanthanum strontium chromites synthesized by the Pechini method[J]. Solid State Ionics, 2002, 146: 301-312.
  • 6Mori Masashi, Hiei Yoshiko, Sammes Nigel M. Sintering behavior of Ca- or Sr-doped LaCrO3 perofskites including second phase of AECrO4 (AE=Sr, Ca) in air[J]. Solid State Ionics, 2000, 135: 743-748.
  • 7Boroomand F, Wessel E, Bausinger H, Hilpert K. Correlation between defect chemistry and expansion during reduction of doped LaCrO3 interconnects for SOFCs[J]. Solid State Ionics, 2000, 129: 251-258.
  • 8Jiang S P, Zhang J P, Zheng X G. A comparative investigation of chromium deposition at air electrodes of solid oxide fuel cell[J]. J. European Ceramic Society, 2002, 22: 361-373.
  • 9Bilger S, et al. Sol-gel synthesis of lanthanum chromite power[J]. J. European Ceramic Society, 1997, 17(8): 1027-1031.
  • 10Tietz F, Arul Raj I, Jungen W, Stover D. High-temperature superconducter materials for contact layers in solid oxide fuel cell: Ⅰ. Sintering behavior and physical properties at operating temperatures[J]. Acta mater, 2001, 49: 803-810.

共引文献35

同被引文献51

引证文献4

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部