期刊文献+

超声处理对RTM工艺成型浸润性的影响 被引量:4

Effect of ultrasonic treatment on the impregnation of RTM composites
下载PDF
导出
摘要 RTM工艺成型过程中树脂对纤维增强体的浸润是非常重要的,浸润不好将导致RTM成型复合材料中产生缺陷,这将降低复合材料的力学性能.在RTM成型过程中采用了超声处理技术,探讨了超声处理对树脂的黏度、表面张力、RTM工艺成型浸润性及复合材料的力学性能的影响.实验结果表明:超声处理使树脂的黏度和表面张力降低,RTM浸润性改善显著,从而提高了复合材料的力学性能. The weak impregnation will result in the formation of traps in the composites because the impregnation of the resin to fiber reinforcement is one of the major factors during the filling process of RTM. It will degrade mechanical performance of the composites. Ultrasonic technology is adapted during the RTM process, and the effect of ultrasonic treatment on the viscosity and surface tension of resin, RTM impregnation and bend property of composite is studied. The results show that ultrasonic treatment degrades the viscosity and surface tension of resin and improves RTM impregnation, which enhances the bend property of RTM composites.
出处 《哈尔滨工业大学学报》 EI CAS CSCD 北大核心 2004年第11期1443-1445,共3页 Journal of Harbin Institute of Technology
基金 国家自然科学基金资助重点项目(59833110).
关键词 超声技术 RTM 碳纤维织物 浸润性 Carbon fibers Impregnation Resins Ultrasonic applications
  • 相关文献

参考文献5

二级参考文献18

  • 1[1]Ghiorse S R. Effect of Void Content on The Mechanical Properties of Carbon/Epoxy Laminates SAMPE Q., 1993, 24(2): 54 ~ 59
  • 2[2]Bowies K J, Frimpong S J. Void Effects on the Interlaminar Shear Strength of Unidirectional Graphite-Fiber-Reinforced Composites.Composite Mater., 1992, 26( 10): 1487 ~ 1509
  • 3[3]Bascom W D, Romans J B. Micro Voids in Glass-Resin Composite. Ind. Eng. Chem. Prod. Res. Dev., 1968, 7:172 ~ 178
  • 4[4]Kohn E J, Sands A G, and Clark R C. Quantitative Measurement of Void Content in Glass-Filament-Wound Composites and Correlation of Interlaminar Shear Strength with Void Content.Ind. Eng. Chem. Prod. Res. Dev., 1968, 7:179 ~ 183
  • 5[5]Rohatgi V, Patel N, and L James Lee. Experimental Investigation of Flow-Induced Mierovoids During Impregnation of Unidirectional Stitched Fiberglass Mat. Polymer Composite, 1996, 17(2): 161 ~ 170
  • 6[6]Yung-Tin Chen, Davis H T, and Macosko W. Wetting of Fiber Mat for Composites Manufacturing: I. Visualizition Experiments. AICHE J.,1995, 41 (10): 2261 ~ 2273
  • 7[7]Parnas R S, Frederick R, and Phelan Jr. The Effect of Heterogeneous Porous Media on Mold Filling in Resin Transfer Molding. SAMPE Q., 1991,22:35 ~ 60
  • 8[8]Chan A W, Morgan F J. A Model on Formation of Rod-Like Voids in Fiber Tows. SAMPE Q., 1993, 24:49 ~ 536
  • 9[9]Yung-Tin Chen, Davis H T, and Macosko W. Wetting of Fiber Mat for Composites Manufacturing: Ⅱ. Air Entrapment Model. AICHE J.,1995, 41 ( 10): 2273 ~ 2281
  • 10[10]Patel N, James Lee. Modeling of Void Formation and Removal in Liquid Composite Molding. Part Ⅱ: Model Development and Implementation. Polymer Composite, 1996, 17(1 ): 104 ~ 114

共引文献15

同被引文献62

引证文献4

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部