期刊文献+

注射成型多模腔充填不平衡现象的产生机理(Ⅱ)——模具流道系统中熔体温度分布的研究 被引量:13

The Mechanism of Filling Unbalance of Plastics Injection Molding in Multi-cavity Molds (Ⅱ)──A Study on Temperature Distribution in Runner System of Mold
下载PDF
导出
摘要 介绍了注射成型中集成式热电偶在熔体温度测量中的应用 ,并分别对流道中温度分布以及多型腔“H”型流道系统中靠近上下型腔的熔体温度进行了测量。实验结果表明剪切生热对流道中熔体温度分布影响显著 ,熔体经过流道分岔口后温度分布形态以及流动方式不再对称于中轴 ,最终导致型腔的不均衡充填。温度测量结果同可视化实验结果一起全面揭示了充填不平衡现象的产生机理。 An integrated thermocouple sensor was employed in measurement of melt temperature in injection molding process. The resin temperature distribution in the runner and the resin temperature at two points in the runner near to the upper and lower cavity in multi-cavity molds with “H' pattern runner system were measured respectively. Results indicated that filling unbalance resulted from dissymmetrical temperature distribution on the cross-section of runner, which was strongly influenced by the shear heat. The temperature measurements together with visualization experiments revealed the mechanism of filling unbalance.
出处 《中国塑料》 CAS CSCD 北大核心 2004年第12期81-85,共5页 China Plastics
关键词 注射成型 多型腔 充填不平衡 集成式热电偶 温度测量 injection molding multi-cavity filling unbalance integrated thermocouple sensor temperature measurement
  • 相关文献

参考文献8

  • 1杨卫民,谢鹏程,杨高品.注射成型多模腔充填不平衡现象的产生机理(Ⅰ)——模具流道系统中熔体流动行为的研究[J].中国塑料,2004,18(11):93-99. 被引量:24
  • 2Yang Weimin,Hidetoshi Yokoi.A Study on Filling Balance in Multi—cavity Molds[C].JSPP.JSPP’02 Tech.Papers,东京:成形加工学会,2002.259-262.
  • 3Yang Weimin, Hidetoshi Yokoi. Improving the Plastics Filling Balance in Multi-cavity Molds by 2-rate Injection[C]. PPS 2002 Papers, Taipei : Polymer Processing Society. 2002.
  • 4Yang Weimin, Hidetoshi Yokoi. Visual Analysis of the FlowBehavior of Core Material in a Fork Portion of Plastic Sand-wich Injection Molding [ J ]. Polymer Testing, 2003,22 ( 1 ) :37-43.
  • 5Yasuhiko MURATA,Hidetoshi YOKOI.Temperature Mea—surement Technologies for Injection Molding[C].Hidetoshi YOKOI.生产研究.东京:东京大学国际产学共同研究所,2000.17~26.
  • 6Hidetoshi YOKOI, Yasuhiko MURATA, t-rkroshi TSLINAKCF:k-II.Measurement of Melt Temperature Distribution along the Cavity Thickness Direction by Using Integrated Thermocou-ple Sensor[ C]. Hidetoshi YOKOI.生产研究,东京:东京大学国际产学共同研究所, 2000.353-360.
  • 7Yasuhiko MURATA, Hidetoshi YOKOI, Yukiharu UEDA.Measurement of Melt Temperature Profile inside the Nozzle of Injection Molding Machine by Integrated Thermocouple Sensor[C]. Hidetoshi YOKOI. 生产研究,东京:东京大学国际产学共同研究所, 1998. 165-171.
  • 8Hidetoshi Yokoi. Measurement of Melt Temperature Profilesinside a Nozzle by Using Integrated Thermocouple CeramicSensor[C]. Hidetoshi Yokoi.生产研究,东京:东京大学国际产学共同研究所,1998. 172 - 175.

二级参考文献7

  • 1横井秀俊,植田幸治,岡克典,平野彰士,村田泰彦.ガラスィンサ一金型にょるランナ一内樹脂流動挙動の解析[C].見:横井秀俊,村田泰彦.JSPP'92 Tech.Papers,東京:成形加工学会,1992.207~210.
  • 2J. Beaumont, J. Young. Mold Filling Imbalances in C, eometrically Balanced Runner Systems[J]. Journal of Injection Molding Technology, 1997,1(3):133-- 136.
  • 3Yang Weimin, Hidetoshi Yokoi. A Study on Filling Balance in Multi-cavity Molds[C]. Yang Weimin, Hidetoshi Yokoi,JSPP'02 Tech. Papers,东京:成形加工学会,2002. 259-262.
  • 4楊衛民,横井秀俊.多数個取リキャピティにおけランナ一部樹脂温度と充填バランスの相関解析[C].見:楊衛民,横井秀俊,JSPP'03 Tech.Papers,東京:成形加工学会,2003.271—274.
  • 5Yang Weimin, Hidetoshi Yokoi. Visual Analysis of the Flow Behavior of Core Material in a Fork Portion of Plastic Sandwich Injection Molding[ J ]. Polymer Testing, 2003,22( 1 ) : 37-43.
  • 6Nikan Kogyo Xinbonnsha. Data Book for Plastics Process[M]. Tokyo: JSTP, 1988.
  • 7J. M. Mckelvey: Polymer Processing [ M ]. New York: John Wiley & Sons, Inc. , 1962.

共引文献23

同被引文献123

引证文献13

二级引证文献29

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部