摘要
应用体积法对SAF2 2 0 5双相不锈钢两种不同形式的焊接接头疲劳强度进行了评定研究 ,对该方法的适用性和有限元计算过程影响因素进行了分析讨论。结果表明 ,对焊态焊接接头 ,体积法局部平均应力Δσave| Ω 参量为具有一定普遍意义的疲劳控制参量 ,对于讨论的两种接头 ,由Δσave| Ω 表示的焊接接头疲劳强度与接头形式无关 ;对SAF2 2 0 5双相不锈钢两种不同形式焊接接头 ,其局部疲劳强度Δσave| Ω=4 1 1 .3MPa ;采用体积法进行疲劳评定时 ,为得到合理的评定结果 ,应选取最小单元尺寸emin≤ 0 .1 4mm进行计算。
The volumetric approach (VA) was applied to the fatigue assessment of SAF2205 duplex stainless steel welded joints with two types of geometrical modes, and its feasibility and the effect of the finite element calculation on this method were discussed. It was shown that VA local average stress is an universal fatigue restraining parameter, and the fatigue intension expressed by the local average stress is independent of the joint geometries. For the welded joints, the local average stress is 411.3 MPa, and the reasonable predicting results can be obtained if the local parameters are calculated by selecting the minimal element size which is 0.14 mm or lower. The results offer the important gist for predigesting the fatigue assessment of welded joints.
出处
《焊接学报》
EI
CAS
CSCD
北大核心
2004年第6期7-10,共4页
Transactions of The China Welding Institution
基金
国家博士基金资助项目 (1 9990 0 5 6 0 5 )
关键词
双相不锈钢焊接接头
体积法
疲劳评定
有限元
Computer applications
Electric arc welding
Fatigue testing
Finite element method
Mechanical properties
Stainless steel
Strain
Stress analysis
