期刊文献+

PowerMEMS气体动压径向轴承承载能力的分析 被引量:7

Dynamic Lubrication of Micro Gas Bearings at an Ultra High Speed
下载PDF
导出
摘要 在微尺度条件下,为了实现超高能量密度的目标,PowerMEMS通常要求其轴承转速达到106 r/min数量级以上,于是提出了微尺度超高转速气体动力润滑轴承的研究。论述了气体动力润滑轴承的微尺度结构特征,提出了PowerMEMS气体动压径向轴承承载能力的验算方法,分析了微尺度条件下气体动压径向轴承结构参数对轴承承载能力的影响。 Micro bearings of Power MEMS are usually designed to work at an ultra high speed more than 10^(6) r/min in order to improve their specific energy. So the dynamic lubrication of micro gas bearings at an ultra speed is researched. First the micro structural characteristics of micro gas-lubricated bearings are investigated, and a method to caculate the load-carrying performance of micro dynamic gas-lubricated bearings is put forword. Then the designs of two typical micro dynamic gas-lubricated bearings that are used in micro gas turbines are vertified. Moreover, the parameters affecting the load-carrying performance of micro dynamic gas-lubricated bearings are analysed.
出处 《重庆大学学报(自然科学版)》 EI CAS CSCD 北大核心 2005年第2期5-7,共3页 Journal of Chongqing University
基金 国家教育部留学回国人员科研启动基金(2002247) 重庆市应用基础研究计划 (7967) 重庆大学基础及应用基础研究基金(200227)
关键词 POWER MEMS 气体动力润滑轴承 承载能力 Power MEMS dynamic gas-lubricated bearings load-carrying performance
  • 相关文献

参考文献5

  • 1张力,徐宗俊,余成龙.基于微型涡轮发动机实现超高能量密度Power MEMS的研究[J].中国机械工程,2003,14(15):1272-1274. 被引量:5
  • 2张力,徐宗俊,王英章.微型涡轮发动机设计与制造的若干关键技术[J].重庆大学学报(自然科学版),2003,26(11):23-26. 被引量:4
  • 3EPSTEIN A H, JACOBASON S A, PROTZ J M, et al. Shirtbotton-sized gas turbine: The Engineering Challenges of Micro High Speed Rotating Machinery [ A ]. Presented at the 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ( ISROMAC - 8 ) [ C ]. Hono-lulu, HI, March 2000.
  • 4KHANNA R. MEMS Fabrication Perpectives from the MIT Microcngine Project[ J ]. Surface and Coatings Technology,2003,163 - 164;273 - 280.
  • 5ALAN H EPSTEIN, STUART A JACOBSON, JON M PROTZ, et al. Freehette[ C]. The 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery( ISROMAC - 8 ), Honolulu, HI, March 2000.

二级参考文献15

  • 1浅三郎.超小型水素燃器のF状とn}[J].日本ガスタ`ビン学会I,2001,29(4):247-254.
  • 2Lu利夫.ボタン型ガスジェネレ`タの崃魈辶ρГ我点[J].日本ガスタ`ビン学会I,2001,29(4):242-246.
  • 3高蚝袷.チップ成型とスラスタへの暧[J].日本ガスタ`ビン学会I,2001,29(4):262-265.
  • 4RIBAUD Y.Ultra micro-turbine: the MIT example[J].日本ガスタ`ビン学会I,2001,29(4):235-241.
  • 5Waitz I A, Gauba G, Tzeng, Y S. Combustors for Micro--gas Turbine Engines. Transactions of the ASME, Journal of Fluids Engineering, 1998, 120 (1): 109~117.
  • 6Orr D J. Macro--scale Investigation of High Speed Gas Bearings for MEMS devices : [Ph. D Thesis]. Massachusetts Institute of Technology, 2000.
  • 7Lee Y B, Kwak H D, Kim C H, et al. Analysis of Gas--lubricated Bearings With a Coupled Boundary Effect for Micro Gas Turbine. Tribology Transactions, Park Ridge, 2001,44 (4) : 685~694.
  • 8Li J F, Sugimoto S, Tanaka S. ManufacturingS ilicon Carbide Microrotors by Reactive Hot Isostatic Pressing Within Micromachined Silicon Molds. Journal of the American Ceramic Society, 2002, 85 (1): 261~26.
  • 9EPSTEIN A H,SENTURIA S D,ANATHASURESH G,et al.Power MEMS and micro engines[ A]. In: Proceedings of the 1997 international conference on solid-state sensors and actuators ,Part2 ( of 2) [ C ]. Chicago: IEEE, 1997,753 - 756.
  • 10EPSTEIN A H, JACOBASON S A, PROTZ J M, et al.Shirtbotton-sized gas turbine: The engineering challenges of micro high speed rotating machinery[ A]. Presented at the 8^th international symposium on transport phenomena and dynamics of rotating machinery ( ISROMAC - 8) [ C]. Honolulu, HI, March 2000.

共引文献6

同被引文献122

引证文献7

二级引证文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部