期刊文献+

电弧离子镀Ti-Al-Ce-N多元多层膜的制备及性能研究 被引量:1

Manufacture and Properties of the Multi-component and Multi-layer Ti-Al-Ce-N Coating Prepared by Multi Arc Ion Plating
下载PDF
导出
摘要 采用Ti-Ce,Ti-Al合金靶,利用电弧离子镀技术在高速钢基底上制备Ti-Al-Ce-N涂层,研究了Ce及Al对TiN系涂层的界面结合强度的影响,同时辅以显微硬度、抗氧化特性的测定,结合TiN涂层的组织结构,讨论了Al、Ce对TiN系涂层的改性。试验表明:TiN涂层中添加微量Ce和Al,可以明显改善膜基结合强度,并且有助于形成(111)和(222)择优取向,使膜层致密提高抗氧化能力。 Ti-Al-Ce-N coating is deposited by multi arc ion plating using the Ti-Ce and Ti-Al alloy targets. The effect of Ce and Al on adhesion between Ti-N coating and substrate are studied. The microstructures and composition of Ti-N coatings are also measured by means of scanning electron microscope (SEM), and X-ray diffraction (XRD) technique. It is found that addition of suitable amount of Ce and Al to Ti-N coatings can produce relatively optimized properties such as adhesion, oxidation resistance .The experimental results also show that the added Ce and Al in Ti-N coatings make a contribution to form the preferred direction along with a (111) or (222) close packed face, which can be one of the reasons that improve some properties mentioned above.
出处 《稀土》 EI CAS CSCD 北大核心 2005年第1期37-41,共5页 Chinese Rare Earths
基金 广东省科技攻关计划资助(2KM00612G)
关键词 稀土元素 多元合金强化 TIN 结合力 rare earth element multi-compents alloying TiN adhesion
  • 相关文献

参考文献18

二级参考文献58

共引文献113

同被引文献32

  • 1白力静,肖继明,蒋百灵,张国君,梁戈.磁控溅射CrTiAlN涂层钻头的制备及其钻削性能研究[J].表面技术,2005,34(4):21-23. 被引量:7
  • 2郭岩,畅庚榕,吴贵智,马胜利,徐可为.新型Ti-Si-C-N纳米复合超硬薄膜的高温热稳定性[J].金属学报,2006,42(2):172-176. 被引量:4
  • 3Rebouta L,Vaz F,Andritschky M,et al.Oxidation resistance of (Ti,Al,Zr,Si)N coatings in air[J].Surface and Coatings Technology,1995(76/77):70-74.
  • 4Holzschuh H.Deposition of Ti-B-N (single and multilayer) and Zr-B-N coatings by chemical vapor deposition techniques on cutting tools[J].Thin Solid Films,2004(469/470):92-98.
  • 5Shtansky D V,Sheveiko A N,Petrzhik M I,et al.Hard tribological Ti-B-N,Ti-Cr-B-N,Ti-Si-B-N and Ti-Al-Si-B-N coatings[J].Surface and Coatings Technology,2005,200(1/4):208-212.
  • 6Sakamaoto Y,Nose M,Mae T,et al.Structure and properties of Cr-B,Cr-B-N and multilayer Cr-B/Cr-B-N thin films prepared by r f-sputtering[J].Surface and Coatings Technology,2003(174/175):444-449.
  • 7Leyendecker T,Lemmer O,Esser S,et al.The development of the PVD coating TiAlN as a commercial coating for cutting tools[J].Surface and Coatings Technology,1991,48(2):175-178.
  • 8Knotek O,Munz W D,Keyendecker T.Industrial deposition of binary,ternary,and quaternary nitrides of titanium,zirconium,and aluminum[J].Journal of Vacuum Science and Technology A,1987,5(4):2173-2179.
  • 9Hones P,Consiglio R,Randall N,et al.Mechanical properties of hard chromium tungsten nitride coatings[J].Surface and Coatings Technology,2000,125:178-184.
  • 10Hones P,Sanjines R,Ley F.Sputter deposited chromium nitride based ternary compounds for hard coatings[J].Thin Solid Films,1998,332:240-246.

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部