期刊文献+

均一球形PDP用荧光粉(Y,Gd)BO_3∶Eu的合成 被引量:7

Synthesis of (Y,Gd)BO_3∶Eu with Identical Spherical Morphology for PDP
下载PDF
导出
摘要 利用共沉淀法通过控制稀土离子浓度、沉淀温度等得到稀土氧化物前驱体沉淀,再将其和H3BO3 按化学计量比混合煅烧制备出了平均粒径在 0. 5~1. 0μm的球形、粒径分布较小和无团聚的 (Y,Gd)BO3∶Eu荧光粉,其性能在一些方面优于商用荧光粉。利用X射线衍射、SEM、粒度分析仪和PL光谱进行表征。研究了不同的煅烧温度对荧光粉性能的影响,结果发现用本实验方法在 800 ℃煅烧即可得到纯相的(Y,Gd)BO3∶Eu。而传统固相合成纯相的(Y,Gd)BO3∶Eu反应温度高达 1 200℃。因本方法工艺较易控制,适于在工业生产上推广。 Eu-doped (Y,Gd)BO_3∶Eu phosphor with spherical particle morphology, small size, high crystallinity and good photoluminescence (PL)intensity was prepared by co-precipitation method. Ultrafine precursor powders were obtained by controlling the solution concentration of Y^(3+),Gd^(3+),Eu^(3+) and temperature of system, the precursor is amorphous and soft when the system temperature maintain from 50 ℃ to 70 ℃. The phosphor particle size is influenced by the solution concentration, and the mean size of the (Y,Gd)BO_3∶Eu particles decreased from 2.3 μm to 0.8 μm when the solution concentration changed from 0.2 mol/L to (0.5) mol/L and shifted to the larger size with the further increase of the solution concentration. Conventional solid state (reaction) require higher sintering temperature above 1 200 ℃ for pure (Y,Gd)BO_3∶Eu phase. However, the co-(precipitation) allows a significant decrease of sintering temperature and the phosphor sintered at 800 ℃ have pure orthorborate phase already. The X-ray diffraction peak intensities increased with increasing temperature. The phosphors prepared at different temperature 800, 1 000, 1 200 and 1 300 ℃ were characterized by (X-ray) diffraction, SEM, particle size determination and photoluminescence. In addition, the characteristics of the particle were compared with those of a commercial product. Crystallinity,particle size and luminescence (intensity) are dependent on sintering temperature. The morphology and size of synthesized particles are strongly effected by sintering temperature. The phosphor particles prepared at 1 200 ℃ have the best (characteristics,) such as completely spherical shape, filled morphology, fine particle size, no-aggregation, and the commercial product prepared by conventional solid state reaction has a irregular shape with aggregation, the particles (began) to (agglomerate) and the particle size became larger at an firing temperature of 1 300 ℃. The (luminescence) intensities of the phosphors (increase) with the sintering temperature and the brightness of (phosphor) increase with increasing temperatures due to favorable crystallization and has a maximum values at (1 200 ℃) when excited with UV light. The particles (sintered) at 1 200 ℃ exhibited better morphology than those of a commercial product.
出处 《发光学报》 EI CAS CSCD 北大核心 2005年第1期61-66,共6页 Chinese Journal of Luminescence
基金 陕西省介观物理重点实验室资助项目
关键词 (Y Gd)BO3:Eu 共沉淀 荧光粉 等离子显示屏 球形颗粒 (Y,Gd)BO_3∶Eu co-precipitation method phosphor PDP spherical morphology
  • 相关文献

参考文献7

二级参考文献23

共引文献83

同被引文献95

引证文献7

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部