期刊文献+

用凝固模拟方法预测铝合金铸件缩松的形成 被引量:1

The Prediction of Porosity Formation in Al-Alloy Castings by means of Solidification Simulation
下载PDF
导出
摘要 用有限元法和六节点等参数单元对铝合金金属型铸造过程进行了温度场的数值模拟,对铸件不同典型部位进行了金相分析,结果表明,参数G/可有效地预测铝合金缩松形成倾向的大小,计算值与实测值基本一致。 In this paer, FEM with six-noded quadratic equiparametric elements has been used to digitally simulate the temperature fields in the process of metal mould casting of Al-alloy. Metallographic analysis has also been performed on the typical sites of the castings. Results show the ability of the parmeter,G/R, to effectively predict the degrees of the tendencies to form porosities inside the castings. Experimetal data are in good tune with the calculated ones.
出处 《南昌航空工业学院学报》 CAS 1994年第1期85-90,共6页 Journal of Nanchang Institute of Aeronautical Technology(Natural Science Edition)
关键词 铝合金 缩松 计算机模拟 凝固 s: Al-alloy metal mould casting porosity computer simulation
  • 相关文献

同被引文献26

  • 1徐宏,程军,钟雪友.铝合金铸件缩孔缩松预测新技术[J].中国有色金属学报,2001,11(z1):34-38. 被引量:4
  • 2丛卫群.控制某些压铸工艺参数以减少铸件气(缩)孔[J].特种铸造及有色合金,1994,14(1):39-40. 被引量:1
  • 3贾宝仟,柳百成.铸件缩松缩孔判据G/的理论基础及应用[J].铸造,1996,45(4):13-15. 被引量:13
  • 4陈海青.铸件凝固过程数值模拟[M].重庆:重庆大学出版社,1991..
  • 5田荣璋 王祝堂.铝合金及其加工手册[M].长沙:中南工业大学出版社,2000..
  • 6PELLINI W S. Factors which determine riser adequacy and feeding range[J]. AFS Trans,1953, 61 (67) :61 -80.
  • 7NIYAMA E, UCHIDA T, MORIKAWA M, et al. A method of shrinkage prediction and its application to steel casting practice[J]. AFS Int. Cast Metal,1982,9:52-63.
  • 8LAURENT V, RIGAUT C. Experimental and Numerical Study of Criteria Functions for Predicting ) Microporosity in Cast Aluminum Alloys[J]. AFS Transaction, 1992, 100:647 - 655.
  • 9CHIOU I J, TSAI H L. Modeling of porosity formation in castings [ J ]. AFS Transactions, 1990,98: 823 - 830.
  • 10LEE P D, CHIRAZI A, SEE D. Modeling microporosity in aluminum - silicon alloys: a review [ J ]. Journal of Light Metals, 2001,1:15 - 30.

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部