期刊文献+

反复焊接对超低碳奥氏体不锈钢耐腐蚀性能的影响 被引量:5

INVESTIGATION OF THE EFFECT OF REWELDING ON ANTI-CORROSION PROPERTIES OF ULTRA-LOW CARBON AUSTENITIC STAINLESS STEEL
下载PDF
导出
摘要 通过对反复焊接1~5次的超低碳奥氏体不锈钢的晶间腐蚀试验及应力腐蚀试验,研究了反复焊接对超低碳奥氏体不锈钢的耐腐蚀性能的影响.试验结果显示,在同一部位反复焊接5次后,超低碳奥氏体不锈钢的晶间腐蚀倾向和应力腐蚀敏感性没有发生明显变化,表明超低碳奥氏体不锈钢在选择合适的焊接材料、焊接工艺和焊接方法的前提下,同一部位可反复焊接5次,而其耐腐蚀性能不会受到影响. An investigation was made on the effect of rewelding on anti-corrosion properties of ultra-low carbon austenitic stainless steel based on intergranular corrosion test and stress corrosion test. Study shows that 5 times of rewelding at the same position will not have evident influence on the trend of intergranular corrosion and the sensitive to stress corrosion of ultra-low carbon austenitic stainless steel, if the proper weld procedure, proper welding material and proper weld technique were adopted.
出处 《理化检验(物理分册)》 CAS 2005年第3期113-116,共4页 Physical Testing and Chemical Analysis(Part A:Physical Testing)
关键词 超低碳奥氏体不锈钢 反复焊接 耐腐蚀性能 Ultra-low carbon austenitic stainless steel Rewelding Anti-corrosion properties
  • 相关文献

参考文献3

  • 1Palaniappan M, Subbaramam R, Baskaran A. et al.Effect of Repeated Repairs on the Stainless Steel Welds upon the Ultrasonic Examination Sensitivity [A]. Proceedings of the 141h World Conference on Non destruetlve Testing (14th WCNDT) [C]. New Delhi, 1996.
  • 2陈进,王印培,孙晓民,项阳.反复焊接对超低碳奥氏体不锈钢力学性能的影响[J].理化检验(物理分册),2004,40(1):1-5. 被引量:3
  • 3Sedriks A john. Corrosion of Staintess Steel[M]. New York: JOHN WILEY & SONS INC, 1996.

二级参考文献1

共引文献2

同被引文献45

引证文献5

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部