期刊文献+

渗透玻璃对牙科CAD/CAM用氧化铝玻璃复合体颜色的影响 被引量:7

Color measurements of dental CAD/CAM alumina-galss-composites
下载PDF
导出
摘要 目的:测定牙科CAD/CAM用氧化铝玻璃复合体系统的颜色,为临床应用奠定基础.方法:选用自行研制的CAD/CAM氧化铝玻璃复合体的AG1、AG2、AG3、AG4色系及Vita In-Ceram AL1、AL2、AL3、AL4色系的渗透玻璃粉,对牙科CAD/CAM用氧化铝块进行渗透,制作10 mm×10 mm,厚度分别为0.5、1、1.5 mm的颜色测量试样,采用分光测色计对颜色进行测定.结果:以1 mm厚度样本为标准,Vita In-Ceram Alumina 范围为L*:69.39~78.41,a*:1.82~4.02,b*:18.35~24.42;CAD/CAM用氧化铝玻璃复合体系统的颜色范围为L* :68.80~78.44,a*:1.32~4.75,b*:16.86~21.86.不同的是AG3铝瓷的b*值和饱和度较AL3铝瓷低,a*值较高;AG1和AG2铝瓷的b*值和饱和度较AL1和AL2铝瓷偏低.2 种体系的可见光谱反射率相近.结论: CAD/CAM氧化铝玻璃复合体色系与Vita In-Ceram Alumina 材料色系的颜色范围近似,可以满足与表面饰瓷颜色匹配的要求. Objective: To measure the color of dental CAD/CAM alumina-glass-composites(AGC). Methods: Dental CAD/CAM alumina block were infiltrated at 1 120 ℃ by laboratory made AG1,AG2,AG3 and AG4 color serials of infiltration glass powder and Vita In-Ceram Alumina AL1,AL2,AL3 and AL4 infiltration glass respectively. Specimens were made with the area of 10 mm×10 mm,thickness of 0.5,1 and 1.5 mm respectively. Color parameters were measured by Minolta CM-2600d spectrophotometer. Results:The specimen with the thickness of 1 mm was used as the standard for color measurement.After infiltration with AL1-AL4 glass powder,the color parameters of Vita alumina core ceramic were L*: 69.39-78.41,a*:1.82- 4.02,b*:18.35-24.42,when infiltrated with AG1-AG4 glass powder, the color parameters of CAD/CAM AGC were L*:68.80-78.44,a*:1.32- 4.75,b*:16.85- 21.86. b*value and chroma of the AG3 core ceramic were lower than that of AL3 core ceramic,while a* value was higher.b* value and chroma of the AG1 and AG2 core ceramic were lower than that of AL1 and AL2 core ceramic. The reflectance curve of CAD/CAM AGC infiltrated by AG1-AG4 glass powder demonstrated the similar trend as that of the core ceramic infiltrated by Vita In-Ceram glass powder. Conclusion: The color range and surface reflection rate of laboratory made AG1-AG4 AGC are similar with those of Vita AL1-AL4 In-Ceram Alumina core and may meet the need of color match with veneer ceramics.
出处 《实用口腔医学杂志》 CAS CSCD 北大核心 2005年第2期183-186,共4页 Journal of Practical Stomatology
基金 全军医学科学技术研究"十五"计划面上项目资助(01MA198)
关键词 CAD/CAM 牙科陶瓷 氧化铝 玻璃 颜色 CAD/CAM Dental ceramic Alumina Glass Color
  • 相关文献

参考文献11

  • 1杨萍.陶瓷颜料颜色与结构关系的探讨[J].中国陶瓷,1998,34(6):18-20. 被引量:13
  • 2Pober R,Giordano R,Compbell S,et al.Compositional analysis of In-Ceram infusion glass.J Dent Res,1992,71(AADR abstracts):253.
  • 3李蓬鹏,王航.In-Ceram体系进展[J].口腔材料器械杂志,1999,8(1):43-45. 被引量:3
  • 4Douglas RD,Brewer JD.Acceptability of shade difference's in metal ceramic crowns.J Prosthet Dent,1998,79(2):254.
  • 5Heffernan MJ,Aquilino SA,Diaz-Arnold AM,et al.Relative translucency of six all-ceramic systems.Part II:Core and veneer materials.J Prosthet Dent,2002,88(1):10.
  • 6Kramer.Dental porcelain shading kit,system and method.U.S.Patent,5685717.1997.
  • 7Kramer.Dental product,shading kit and method.U.S.Patent,5906490.1999.
  • 8O'Brien WJ,Fan PL,Groh CL.Color difference coefficients of Body-Opaque double layers.Int J Prosthodont,1994,7(1):56.
  • 9Douglas RD,Przybylska M.Predicting porcelain thickness required for dental shade matches.J Prosthet Dent,1999,82(2):143.
  • 10Sproull RC.Color matching in dentistry.Part Ⅱ:Practical applications for the organization of color.J Prosthet Dent,1973,29(5):556.

二级参考文献2

共引文献15

同被引文献154

引证文献7

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部