期刊文献+

低碳高合金钢和高锰钢冲击腐蚀磨损特性研究 被引量:2

Comparison of corrosive impact abrasion behavior between low carbon high alloy steel and high manganese steel
下载PDF
导出
摘要 采用改进的MLD-10型冲击腐蚀磨损试验机,模拟湿磨工况条件,对新型衬板材质低碳高合金钢和传统材质高锰钢的抗冲击腐蚀磨损特性进行了研究。比较两种材料试样在一定时间内的失重变化情况,表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。另外分析了冲击腐蚀磨损面形貌、磨面表层及亚表层的状态变化,发现两种材料的冲击腐蚀磨损机制有明显差异,并且都随时间变化而发生转变。 Under wet ball mill conditions, corrosive impact abrasion behavior of a newly developed low carbon high alloy steel liner material were researched with a modified MLD - 10 wear tester, and comparison with the traditional high manganese steel was made. Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel. Besides, SEM morphology of worn surfaces and metallography of subsurface zones were observed after test, which shows that corrosive impact abrasion mechanisms of these two kinds of steels differ greatly and may both change along time.
出处 《兵器材料科学与工程》 CAS CSCD 北大核心 2005年第2期12-15,共4页 Ordnance Material Science and Engineering
基金 教育部重点项目(01104)安徽省自然科学基金(00046401)
关键词 冲击腐蚀磨损 高锰钢 低碳高合金钢 板材 试样 衬板 形貌 抗冲击 新型 湿磨 corrosive impact abrasion low carbon high alloy steel high manganese steel white layer
  • 相关文献

参考文献9

  • 1何力,伍玉娇,张晓燕,唐军.锰系奥氏体钢的发展及前景(一)[J].现代机械,1999(2):12-14. 被引量:9
  • 2朱旻昊,周仲荣,刘家浚.摩擦学白层的研究现状[J].摩擦学学报,1999,19(3):281-287. 被引量:22
  • 3杨业元,方鸿生,郑燕康.接触应力状态对材料冲击磨损特性的影响[J].金属学报,1995,31(7). 被引量:4
  • 4张保法,刘英杰,沈万慈,王远飞,唐祥云,王晓丹.冲击磨损中合金结构钢的组织结构变化[J].钢铁研究学报,1996,8(4):34-36. 被引量:2
  • 5Albertin E,Sinatora A. Effect of carbide fraction and matrix microstructure on the wear of cast iron balls tested in a laboratory ball mill[J].Wear,2001,250:492-501.
  • 6Kim K Y,Bhattacharyya S. An electrochemical polarization technique for evaluation of wear-corrosion in moving components under stress[J].Wear of Materials,1981:772-778.
  • 7Larsen-Basse J,Premaratne B. Effect of relative hardness on transitions in abrasive wear mechanisms[J].Wear of Materials,1983:161-166.
  • 8Ann Sundstr m,José Rendó n,Mikael Olsson. Wear behaviour of some low alloyed steels under combined impact/abrasion contact conditions[J].Wear,2001,250:744-754.
  • 9Suh N P. An overview of the delamination theory of wear[J].Wear,1977,44:1-16.

二级参考文献17

  • 1仝健民,金属热处理学报,1993年,2卷,1页
  • 2Bai Yilong,Res Mechanica,1990年,31卷,133页
  • 3温诗铸,摩擦学原理,1990年
  • 4高彩桥,金属的摩擦磨损与热处理,1988年
  • 5郑燕康,清华大学学报,1986年,2期,34页
  • 6刘英杰,Proceeding of the INternational Symposium on Tribology,1993年
  • 7Bai Y L,Res Mechanica,1990年,31卷,133页
  • 8周仲荣,摩擦学学报,1999年,17卷,3期,272页
  • 9Zhou Z R,Wear,1997年,212期,50页
  • 10Yang Y Y,Tribol Int,1996年,29期,425页

共引文献32

同被引文献8

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部