期刊文献+

钛聚合体改性膨润土及其吸附性能研究 被引量:1

The Titanium-bearing Polymer Modified Bentonite and Its Adsorption
下载PDF
导出
摘要 为利用膨润土的层间活性有效提高其吸附性能,用各种方法合成金属钛的聚合体,并引入膨润土层间进行改性,研究了合成方法、条件等对膨润土结构、性能的影响,并以红色染料模拟有机废水探讨其吸附性。结果表明,聚合体的合成方法、浓度及介质的pH等条件对改性膨润土的结构和性能均有影响。用Ti4在层间水解生成聚合体的合成方法能够有效地改性膨润土、增大层间距、提高其吸附性。 The synthesized titanium-hearing polymers were added into lattice layers of the bentonite to modified the original ben-tonite in order to effectively improve its adsorption capability. The influences on the structures and capabilities of the bentonite caused by titanium-bearing polymers synthesized by various methods in various conditions have been studied. Meanwhile, the ca pability of the modified hentonite adsorbing the orcein dye. which represents the organic waste water, also has been studied. This study indicates that the structures and adsorption capabilities of the titanium-bearing polymer modified bentomte are influ enced by synthesizing methods of Ti-bearing polymers. Ti concentrations and pH values of the medium in the synthesizing process. It is believed that the substitute of interlamellar water by Ti4 ions in the structure of the modified bentomte could effec-tively improve the mlerlamellar space and its adsorption capability.
作者 叶玲
出处 《矿物岩石地球化学通报》 CAS CSCD 2005年第2期121-124,共4页 Bulletin of Mineralogy, Petrology and Geochemistry
基金 福建省自然科学基金资助项目(D0110011)
  • 相关文献

参考文献5

二级参考文献60

  • 1戴劲草,贝逸翎,林庆扬,黄继泰.硅烷修饰粘土对橡胶的补强作用[J].华侨大学学报(自然科学版),1995,16(2):159-164. 被引量:6
  • 2[1]Taborda A V, Brusa M A, Grela M A. Photocatalytic degradation of phthalic acid on TiO2 nanoparticles[J]. Applied Catalysis A: General, 2001, 208: 419-426
  • 3[2]Makarova O V, Rajh T, Thurnaure M C. Surface modification of TiO2 nanoparticles for photochemical reduction of nitrobenzene[J]. Environmental Science Technology, 2000, 34: 4797-4803
  • 4[3]Wu J, Uchida S, Fujishiro Y et al. Synthesis and photocatalytic properties of HNbWO6/TiO2 and HNbWO6/Fe2O3 nanocomposites[J]. Journal of Photochemistry Photobiology A: Chemistry, 1999, 129-133
  • 5[4]Yanagisawa M, Uchida S, Sato T. Synthesis and photochemical properties of Cu2+ doped layered hydrogen titanate[J]. International Journal of Material, 2000, 2: 339-346
  • 6[5]Yanagisawa M, Sato T. Synthesis and photocatalytic properties of titania pillared hydrogen tetratitanate using titanyl acylate precursor[J]. International Journal of Material, 2001, 3: 157-160
  • 7[6]Reutergardh L B, Iangphasuk M. Photocatalytic decolourization of reactive azo dye: A comparison between TiO2 and CdS photocatalysis[J]. Chemosphere, 1997, 35: 585-596
  • 8[7]El-Maazawi M, Finken A N, Nair A B et al. Adsorption and photocatalytic oxidation of acetone on TiO2: An in situ transmission FT-IR study[J]. Journal of Catalysis, 2000, 191: 138-146
  • 9[8]Matthews R W. An adsorption water purifier with in situ photocatalytic regeneration[J]. Journal of Catalysis, 1988, 113: 549-555
  • 10[9]Mishra T, Parida K. Transition metal pillared clay 4. A comparative study of textural, acidic and catalytic properties of chromia pillared montorillonite and acid activated montmorillonite[J]. Applied Catalysis A: General, 1998, 166: 123-133

共引文献122

同被引文献17

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部