期刊文献+

纤维型纳米隔热材料的研制 被引量:5

Preparation of Fiber-Type Nano-Heat-Insulating Materials
下载PDF
导出
摘要 以纳米填料改性环氧树脂为基体,空心微珠和有机纤维为隔热填料,采用湿法缠绕工艺制备了纳米隔热材料.结果表明,F12型纳米隔热材料的隔热性能最佳,其热导率(20~150℃)为0.23~0.28 W/(m·K),且随着温度的升高而增加.此外,隔热材料在150℃下加热100s后,背壁温度不超过50℃. With nanoparticles modified epoxy serving as matrix, hollow glass bead and organic fiber as heat-insulating fillers, nano-heat-insulating materials are prepared by wet-winding. The results show that F 12-type nano-heat-insulating materials have better heat-insulating property. Their thermal conductivity(20~150℃) is 0.23~0.28 W/(m·K), and increases with the increasing temperature. When the materials are heated at 150℃ for 100 s, its backside temperature is lower than 50℃.
出处 《宇航材料工艺》 CAS CSCD 北大核心 2005年第3期24-27,共4页 Aerospace Materials & Technology
关键词 纳米纤维隔热材料 改性环氧树脂 热导率 航空材料 湿法缠绕 固体火箭发动机 Nanoparticle,Heat-Insulating materials,Thermal conductivity,Backside temperature,Wet-Winding
  • 相关文献

参考文献12

二级参考文献17

  • 1[1]Kurokawa Y, Yasuda H, et al. Journal of Materials Science Letters, 1997, 16(20): 1670~1672.
  • 2[2]Furuichi N, Kurokawa Y, et al. Journal of Materials Science, 1996, 31: 4307~4310.
  • 3[3]Oya A, Kurokawa Y, et al. Journal of Materials Science, 2000, 35: 1045~1050.
  • 4[4]Fu S Y, Lauke B, et al. Journal of Materials Science,2001, 36: 1243~1251.
  • 5[5]Pegoretti A, Ricco T. Journal of Composite Materials,2000, 34: 1009~1027.
  • 6[6]Hamada H, Fujihara K, et al. Composites: Part A,2000, 31: 979~990.
  • 7[7]Lee N J, Jang J. Composites: Part A, 1999, 30: 815~822.
  • 8[8]Liu Z, Gilbert M. Journal of Applied Polymer Science,1996, 69(7): 1081.
  • 9[9]Khare A, Mitra A, et al. Journal of Materials Science,1996, 31: 5691~5695.
  • 10[10]Hammer C O, Maurer F H J, et al. Journal of Materials Science, 1999, 34:5911~5918.

共引文献105

同被引文献63

引证文献5

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部