期刊文献+

基于B样条迭代法的激光光条噪声去除技术研究 被引量:10

Research on removing the noise on the laser stripe based on the iterative fitting of B-spline
原文传递
导出
摘要 在基于线结构光的视觉测量系统中,激光光条中心的提取精度是影响系统最后精度的关键因素。目前常用的光条中心提取方法都没有去除光条上的干扰噪声,在分析现有方法的基础上提出了一种利用B样条迭代去除光条噪声的方法。以光条上的点作为控制顶点拟合B样条曲线,在同一位置下用B样条曲线上的点取代噪声点,这样反复修改噪声点的位置使其逐渐逼近实际曲线,从而达到去除噪声的目的。利用重心法提取去噪后光条的中心,着重分析了参与运算的像素的取值范围。通过对比实验证明该方法的提取精度远高于其它方法,从而验证了去除噪声的有效性。 In structured-light vision system, the accuracy of laser stripe center position is the main factor that determines the final system accuracy. The noise on the laser stripe is not removed in current extraction algorithms. Based on the analysis of these methods a novel extraction algorithm implemented by iterative fitting of B-spline was proposed. The pixels on the laser stripe were taken as control vertices for B-spline fitting. The noise was iteratively replaced by the pixel on the B-spline at the same horizontal position. A gravity model approach was applied to extract the laser stripe center after the noise removed. The number and the distribution of the pixels used in this algorithm were analyzed with the emphasis. The extraction accuracy of this algorithm was proved higher than others via contrast experiments. This demonstrates that the noise is removed effectively.
出处 《光学技术》 EI CAS CSCD 北大核心 2005年第3期430-433,共4页 Optical Technique
关键词 结构光 B样条曲线 光条中心 迭代算法 噪声 structured_light B_spline curve laser stripe center iteration algorithm noise
  • 相关文献

参考文献7

二级参考文献21

  • 1陈伟飞.光切法三维面型自动测量系统的研究[M].西安:西安交通大学,1994..
  • 2宋元鹤.智能化物体位移及三维面形光电测量的理论及实用化研究[M].西安:西安交通大学,1997..
  • 3甘泉.虚拟定位技术中的原理和传感器的研究[M].天津:天津大学精仪学院,2000..
  • 4邹定海.三维视觉检测系统研究及其ADC应用[M].天津:天津大学精仪学院,1992..
  • 5王红.[D].北京:北京航空航天大学自动化科学与电气工程学院,1996.36~41.
  • 6Kenneth R Casfleman. Digital image processing[M]. Beijing: Tsinghua University Press, 1998. 247 ~ 249.
  • 7J P Kruth, A Kerstens. Reverse engineering modeling of free-form surfaces from point clouds subject to boundary conditions [J ]. Journal of Materials Processing Technology, 1998. 76:120~ 127.
  • 8Abdalla Alrashdan, Saeid Motavalli, Behrooz Fallahi.Automatic segmentation of digitized data for reverse engineering applications [J]. IIE Transactions. 2000.32 : 59 ~ 69.
  • 9Giovanna Sansoni, Matteo Caroeei, Roberto Rodella.Calibration and performance evaluation of a 3-D imaging sensor based on the projection of structured light [J].IEEE Transaction on Instrumentation and Measurement , 2000, 49(3) : 628~636.
  • 10Yan Qingiin. Numerical Value Analyse [M]. Beijing:Beijing Aviation and Spaceflight Publishing Company.1991. 206~215 (in Chinese).

共引文献142

同被引文献103

引证文献10

二级引证文献191

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部