摘要
用差示扫描量热法测定了Ⅲ型改性剂对ＭＣ尼龙－６等温结晶行为的影响。结果表明，Ａｖｒａｍｉ指数ｎ、成核机理、晶体生长方式及结晶晶型基本不受改性剂的影响，Ⅲ型改性剂使ＭＣ尼龙－６熔体等温结晶条件下结晶速率变慢，结晶度χｃ略有降低，平衡熔点升高６℃，有利于改善ＭＣ尼龙－６的韧性及耐热性。
The effect of modifier Ⅲ on the crystallization behavior of MC nylon-6 has been studied by means of differential scanning calorimetry(DSC).Avrami exponent n,the mechanism of nucleation,spherulite growth style and the crystal form of MC nylon-6 have been influenced by the modifier Ⅲduring the isothermal crystallization from melt.By adding 1%(mass) modifier Ⅲ into MC nylon-6,the overall bulk crystallization rate and the crystalline degree decrease.Equilibrium melting points optained by Hoffman-Weeks analysis was increased about 6℃ in modified sample compared to normal MC nylon-6.Modifier Ⅲ improves the toughness and thermal stability of MC nylon-6.
出处
《高分子材料科学与工程》
EI
CAS
CSCD
北大核心
1995年第5期74-78,共5页
Polymer Materials Science & Engineering
关键词
MC尼龙-6
改性剂
等温结晶
动力学
尼龙塑料
s:MC nylon-6,isothermal crystallization,kinetics,differential scanning calorimetry(DSC),modifiers for MC nylon-6
