期刊文献+

环氧树脂复合泡沫材料的压缩力学性能 被引量:38

COMPRESSIVE BEHAVIOR OF EPOXY SYNTACTIC FOAM
下载PDF
导出
摘要 对空心玻璃微珠填充环氧树脂复合泡沫材料进行了准静态压缩实验,研究了材料的宏观压缩力学性能,并提出了弹性模量和屈服强度的预测公式。此外,对压缩试件的断口进行了宏、细观观察,研究了材料的压缩破坏机理。结果表明,复合泡沫材料在压缩过程中,具有普通泡沫材料的应力-应变曲线的典型特征,在应变为2%左右时材料发生屈服,在应变大于30%后发生破坏。此外,材料的杨氏模量和强度均随密度的减小而下降,预测公式给出的结果与实验值基本一致。压缩试件断口的宏、细观观察表明,复合泡沫材料主要的破坏形式为剪切引起的弹塑性破坏。 The compressive mechanical properties of epoxy syntactic foam reinforced with hollow glass microspheres are studied by quasi-static compression tests. Some predicting formulae of Young~ s modulus and yield strength of syntactic foam are proposed based on the results of composite mechanics. In addition, the failure mechanism of syntactic foam is investigated by macroscopic and microscopic observation of fractured specimens. The results show that the deformation characteristics of syntactic foams are very similar to those of plain foams during compression. The syntactic foam is yielded when the strain reaches about 2% and it is collapsed when the strain is larger than 30%. Furthermore, the Young's modulus and yield strength of syntactic foam are decreased with the decrease of density of material, and the predicted results of formulae are basically in agreement with the experimental data. The macroscopic and microscopic observation of fractured specimens indicates that the main failure mode is elasto-plastic collapse caused by shear.
出处 《复合材料学报》 EI CAS CSCD 北大核心 2005年第4期17-22,共6页 Acta Materiae Compositae Sinica
基金 国防科技重点实验室基金(51460020103hk01) NSAF联合基金(10276004)
关键词 复合泡沫材料 力学性能 压缩 失效机理 环氧树脂 syntactic foam mechanical properties compression failure mechanism epoxy resin
  • 相关文献

参考文献10

  • 1卢子兴,袁应龙.高应变率加载下复合泡沫塑料的吸能特性及失效机理研究[J].复合材料学报,2002,19(5):114-117. 被引量:22
  • 2卢子兴.复合泡沫塑料力学行为的研究综述[J].力学进展,2004,34(3):341-348. 被引量:34
  • 3Huang J S, Gibson L J. Elastic moduli of a composite of hollow spheres in a matrix [J]. J Mech Phys Solids, 1993, 41(1): 55-75.
  • 4卢子兴 严寒冰 徐秉业 黄筑平主编.复合泡沫塑料有效模量的预测方法[A].徐秉业,黄筑平主编.塑性力学和地球动力学进展[C].北京:万国学术出版社,2000.111-117.
  • 5卢子兴 严寒冰 刘波 见:白以龙 杨卫主编.复合泡沫塑料力学性能的实验研究[A].见:白以龙,杨卫主编.力学2000[C].北京:气象出版社,2000.584-586.
  • 6Bardella L, Genna F. On the elastic behavior of syntactic foams [J]. InterJ Solids and Struct, 2001, 38(40-41):7235-7260.
  • 7Gupta N, Woldesenbet E, Mensh P. Compression properties of syntactic foams: Effect of cenosphere radius ratio and specimen aspect ratio [J]. Composites Part A, 2004, 35(1): 103-111.
  • 8Gibson L J, Ashby M F. The mechanics of three-dimensional cellular materials [J]. Proc Roy Soc Lond, 1982, A382:43-59.
  • 9Nicolais L, Narkis M. Stress-strain behavior of styrene-acrylonitrile/glass bead composites in the glassy region [J].PolymEngSci, 1971, 11: 197-199.
  • 10Ahmed S, Jones F R. A review of particulate reinforcement theories for polymer composites [J]. J Mater Sci, 1990,25: 4933-4942.

二级参考文献56

  • 1蔡小烨,梁小清,尚嘉兰.SiO_2空心微球复合材料力学性能的实验研究[J].复合材料学报,1994,11(4):69-75. 被引量:6
  • 2卢子兴,王仁,黄筑平,韩铭宝,田常津,李怀祥.泡沫塑料力学性能研究综述[J].力学进展,1996,26(3):306-323. 被引量:51
  • 3卢子兴,高镇同.应用微分方法确定复合泡沫塑料的杨氏模量[J].北京航空航天大学学报,1996,22(6):692-695. 被引量:11
  • 4卢子兴 严寒冰 等.复合泡沫塑料力学性能的实验研究.力学2000会议文集[M].北京:气象出版社,-.584-566.
  • 5严寒冰.复合泡沫塑料静动态力学性能分析[M].北京:北京航空航天大学,2000..
  • 6Shutov F A. Syntactic polymer foams. Advances in Polymer Science, 1986, 73/74:63~123
  • 7DeRuntz J A, Hoffman O. The static strength of syntactic foams. J Appl Mech, 1969, 36:551~557
  • 8DeRuntz J A. Some applications of plasticity theory to the statics of syntactic foam. J Appl Mech, 1971, 38:23~29
  • 9Barber E, Nelson J, Beck W. Improving properties in rigid urethane foams using glass bubbles. J Cell Plast, 1977, 13:383~387
  • 10Puterman M, Narkis M, Kenig S. Syntactic foams Ⅰ. preparation, structure and properties. J Cell Plast, 1980, 16:223~229.

共引文献52

同被引文献455

引证文献38

二级引证文献178

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部