期刊文献+

螺旋折流板冠形翅片管油冷器的性能与工业应用 被引量:2

INVESTIGATION AND APPLICATION OF OIL COOLER WITH CORONAL FINNED TUBES SUPPORTED BY HELICAL BAFFLES
下载PDF
导出
摘要 对螺旋折流板冠形翅片管油冷器的传热与阻力性能进行了实验研究.结果表明,其壳程传热膜系数可达1 100~1 300 W/(m2·K),而壳程阻力系数比同等条件下的弓形折流板低30%~50%.将螺旋折流板冠形翅片管油冷器应用于石化生产中的结果表明,其传热性能比原低肋管油冷器高20%~35%,设备投资低30%,动力消耗比弓形折流板换热器低30%.另外由于增强了油流体湍流程度,使油冷器的结垢减少. The heat transfer and flow resistance performance of oil cooler with coronal finned tubes supported by helical baffles was studied. Experimental results indicated that heat transfer film coefficient in shell side of oil cooler was 1 100-1 300 W/(m^2· K),and its pressure drop was 30%- 50% lower than that of oil cooler with smooth tubes supported by segmental baffles. Commercial substitution of said oil cooler for the original cooler with low finned tubes was performed and run for more than 6 months. Results showed that as compared with the old cooler the heat transfer performance of the new cooler was 20%-35% higher, the equipment investment was 30% lower and the energy consumption reduced 30%. Furthermore, fouling in oil cooler was reduced due to the enhancement of fluid medium turbulence.
作者 蒋翔 朱冬生
出处 《石油炼制与化工》 CAS CSCD 北大核心 2005年第6期65-68,共4页 Petroleum Processing and Petrochemicals
基金 广东省自然科学基金重点项目(04105950)。
关键词 换热器 螺旋折流板 翅片管 传热 流动 工业应用 阻力性能 油冷器 冠形 传热膜系数 heat exchanger helical baffles finned tube heat transfer fluid flow
  • 相关文献

参考文献10

  • 1朱冬生,钱颂文.强化传热技术及其设计应用[J].化工装备技术,2000,21(6):1-9. 被引量:34
  • 2Bergles A E. Heat transfer enhancement-the maturing of sec ond-generation heat transfer technology. Heat Transfer Engineering, 1997,18(1) :47~55.
  • 3蒋翔,李晓欣,朱冬生.几种翅片管换热器的应用研究[J].化工进展,2003,22(2):183-186. 被引量:26
  • 4邓先和,王世平,林培森,胡进,邓颂九.油冷器强化传热研究[J].化工学报,1995,46(2):245-249. 被引量:26
  • 5张正国,林培森,王世平,邓颂九,涉谷久雄.螺旋隔板花瓣管油冷却器的传热强化[J].化工学报,2001,52(6):482-484. 被引量:16
  • 6王素华,王树立,赵志勇.螺旋折流板换热器流动特性研究[J].石油化工高等学校学报,2001,14(1):64-67. 被引量:59
  • 7Kline S J, Mcclintock F A. Describing uncerties in single-simple experiments. Mechanical Engineering, 1993,56(1): 3~8.
  • 8Lutcha J, Nemcansky J. Performance improvement of tubular heat exchangers by helical baffles. Chemical Engineering Research & Design, 1990,68(5) :263~270.
  • 9Karal D, Stehlik P, Van Derploeg H T. Helical baffles shelland-tube heat exchangers, Part I: experimental verification. Heat Transfer Engineering, 1996,17(1) :93~100.
  • 10Stehik P, Nemcansky, Kral D. Comparison of correction factors for shell-and-tube heat exchangers with segmental or helical baffles. Heat Transfer Engineering, 1994, 15(1): 55~64.

二级参考文献23

共引文献140

同被引文献21

引证文献2

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部