期刊文献+

低温热处理对AZ91D镁合金压铸件组织和力学性能的影响 被引量:1

Effects of Low Temperature Heat Treatment on Microstructure and Mechanical Properties of Die Castings AZ91D Alloy
下载PDF
导出
摘要 通过扫描电镜(SEM)、能量色散谱仪(EDS)、X射线衍射仪(XRD)、显微硬度计、金相显微镜以及拉伸试验等对AZ91D压铸镁合金在不超过300℃、短时间热处理条件下的组织结构及力学性能进行了研究。结果表明,热处理未引起该合金微观组织、相结构、硬度和力学性能的显著变化,说明短时间的低温热处理不会对AZ91D压铸镁合金的组织及力学性能产生不良的影响。 The microstructure and mechanical properties of the AZ91D being heat-treated below 300℃ was investigated by scanning electron microscopy ( SEM ), energy dispersion spectroscopy ( EDS ), X-ray diffraction ( XRD ), microhardness tester ,metallographic microscope and tensile test. The results show that there are no significant change in microstructure, phase structure,hardness and mechnical properties of the AZgl D magnesium alloy after heat treatment below 300℃ ,indicating that microstructure and mechanical properties of AZ91D magnesium alloy are not bad affected by lower temperature for short time.
作者 黄巍 李荻
出处 《金属热处理》 EI CAS CSCD 北大核心 2005年第9期52-55,共4页 Heat Treatment of Metals
关键词 AZ91D镁合金 低温热处理 微观组织 力学性能 AZ91D magnesium alloy low temperature heat treatment microstructure mechanical properties
  • 相关文献

参考文献6

二级参考文献28

  • 1朱鸣芳,苏华钦.半固态等温处理制备粒状组织ZA12合金的研究[J].铸造,1996,45(4):1-5. 被引量:47
  • 2张唯敏(译),国外金属加工,1999年,1期,39页
  • 3谢水生,半固态金属加工技术及其应用,1999年,1页
  • 4陆文华,铸造合金及其熔炼,1997年,378页
  • 5美国金属学会,金属手册.第2卷(第9版),1994年,689页
  • 6Hu H.Squeeze of Magnesium Alloys and Their Composites[J].Mater. Sci.,1998(3):1579-1589.
  • 7吕广燕,张明远.工程材料及成形技术基础[M].北京:高等教育出版社.
  • 8Alan Luo, Jean Renaud, Isao Nakatsugawa, et al. Magnesium castings for automotive applications[J]. JOM, 1995, 47(7): 28 ~ 31.
  • 9Froes F H, Eliezer D, Aghion E. The science, technology, and applications of magnesium[J]. JOM, 1998, 50(9): 30 ~ 34.
  • 10Song G L, Atrens A,St John D. An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys[A]. Magnesium Technology 2001[M] ,Edited by J Hryn, TMS (The Minerals, Metals & Materials Society), 2001, 255.

共引文献133

同被引文献17

  • 1杨明波,潘复生,李忠盛,张静.Mg-Al系耐热镁合金中的合金元素及其作用[J].材料导报,2005,19(4):46-49. 被引量:49
  • 2M1HRIBAN O P. Fundamentals of Magnesium Alloys Metallurgy [M]. Woodhead Publishing Limited, 2013.
  • 3NIE J F. Precipitation and hardening in magnesium alloys [J]. Metall Mater Trans A, 2012, 43(11): 3891-3939.
  • 4AGHION E, BRONFIN B, ELIEZER D. The role of the magnesium industry in protecting the environment [J]. J Mater Process Tech, 2001, 117: 381-385.
  • 5GOKAN Y, SUZUKI A, NOZAWA S. Development of heat resistant Mg-Zn-Al-Ca-RE diecasting alloys [J]. Mater Sci Forum, 2003, 419/422:451-456.
  • 6BAI J, SUN Y S, XUE F. Microstructures and creep behavior of as-cast and annealed heat-resistant Mg-4AI-2Sr-ICa alloy [J]. Mater Sei EngA, 2012, 531: 130-140.
  • 7WEI Y H, HOU L F, YANG L J, et al. Microstructures and properties of die casting components with various thicknesses made of AZ91D alloy [J]. J Mater Process Technol, 2009, 209(7): 3278-3284.
  • 8ZHAI Q Q, HUA Q, ZHANG Y H. Study on mechanical properties of Mg-A1-Zn-Mn alloys cast by two different methods [J]. Mater Sci. Eng A, 2009, 507(1/2): 1-5.
  • 9KIM J M, PARK B K, SHIN K, et al. Development of Mg-AI-Zn based die-casting alloys for elevated temperature applications [J] Mater Sei Forum, 2005, 475/479: 525-528.
  • 10OKAMOTO H. Phase Diagrams of dilute binary alloys [M]. ASM International, Material Park, OH. 2002: 2048-2049.

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部