期刊文献+

低碳钢试件弹塑性边界的白光相关检测 被引量:8

Determination of Low-carbon Steel Specimen Elastic-Plastic Boundary Using Improved White-light Correlation Method
下载PDF
导出
摘要 金属试件的弹塑性边界检测对判断该试件是否失效有着重要意义,因此一直是研究人员较感兴趣的研究课题。利用激光和白光作为照明光源的方法都曾被提出以检测金属试件的弹塑性边界以及塑性变形。为避免激光测量的诸多缺点,本文提出一种用白光作为照明光源并结合数字图像处理来检测低碳钢试件弹塑性边界的方法。该方法将数字图像相关和低碳钢试件表面弹塑性变形前后对照明光强的反射特性结合起来以判断试件是否进入塑性屈服。文中通过对加载过程中低碳钢试件表面序列图像的处理,准确地判断了该试件是否进入塑性屈服,验证了该方法的可行性。 Determination of elastic-plastic boundary and plastic strains on the surface of metal specimen has long been an attracting and challenging research topic and also is meaningful in determining whether the specimen is in the failure state or not. Both laser speckle ahd white-light methods have been presented to measure the elastic-plastic boundary and plastic strains of the specimen. To avoid the shortcomings accompanying the laser method, an improved and simple optical method is proposed to determine the elastic-plastic boundary of low-carbon steel specimen in this paper, which using white-light scattering generated by plastically induced surface roughness on the metal specimen polished surface. By digital processing of consecutive images acquired during load, it is possible for us to accurately determine the initiation of the plastic strain.
出处 《实验力学》 CSCD 北大核心 2005年第3期381-387,共7页 Journal of Experimental Mechanics
基金 国家自然科学基金资助项目(10232010)
关键词 塑性变形 光强相关系数 数字图像相关 无损检测 plastic strain intensity correlation coefficient digital image correlation nondestructive examination
  • 相关文献

参考文献14

  • 1Yamaguchi K, Mellor P B. Thickness and grain size dependence of limit strains in sheet metal stretching[J]. Int.J.Mech.Sci.,1978, 18:85~90.
  • 2Dautzenberg J H, Kals JA G. Stress state and surface roughness[J]. Advanced Technology of Plasticity, 1984, 1:186~190.
  • 3Thomson P F, Shafer B V. The roughening of free surface roughness[J]. Adv Technol Plasticity, Japan, 1984,1:18~26.
  • 4Dai Yuzhong, Chiang F P. Scattering from plastically roughened surfaces and its applications to strain assessment[J]. Optical Engineering, 1991, 31(9):1269~1276.
  • 5Du M L, Chiang F P. The effect of static tensile strain on fatigue failure-An experimental study using laser speckles[J]. Int.J.Fatigue, 1991,20(5):331~338.
  • 6Dai Y Z, Tay C J, Chiang F P. Determination of the plastic zone by laser speckle correlation[J]. Exp. Mech., 1991, 31:348~352.
  • 7TAY C J, YAP C M, SHANG H M, TAY T E. Plastic strain measurement in polypropylene using laser speckle technique[J]. Journal of Materials Processing Technology, 1995, 48 : 307~313.
  • 8Akira Kato. Determination of fatigue damage in steel using laser speckle[J]. Optics & Lasers Engineering, 2000, 33:323~333.
  • 9Akira Kato,Mitsue Hayashi. Fatigue life estimination of steel speckle sensor. NDT &E International, 1999, 32:139~145.
  • 10续伯钦 伍小平.利用激光衍射谱的变化测量金属表面的塑性变形并确定其弹塑性边界.力学学报,1984,6(2):175-184.

二级参考文献7

  • 1李庆扬 王能超.数值分析[M].武汉:华中理工大学出版社,1982..
  • 2高建新 周辛庚 等.数字散斑相关分析法的原理与应用(一).第七届全国实验力学学术会议论文集[M].北京大学出版社,1992.614-617.
  • 3滕敏康.实验误差和数据处理[M].南京大学出版社,1989.234-244.
  • 4高建新,第七届全国实验力学学术会议论文集,1992年,10卷,614页
  • 5滕敏康,实验误差和数据处理,1989年,234页
  • 6李庆扬,数值分析,1982年,101页
  • 7刘宝琛,伍小平.细观力学实验技术综述[J].实验力学,1992,7(1):1-10. 被引量:16

共引文献36

同被引文献88

引证文献8

二级引证文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部