期刊文献+

微生物絮凝剂普鲁兰去除原水浊度的技术研究 被引量:1

Technique of removing turbidity from raw water by microbial flocculant pullulao
下载PDF
导出
摘要 为了确定微生物絮凝剂普鲁兰的最佳絮凝除浊条件,采用正交试验,分析了原水浊度、药品投加量、水力条件、pH值、水温等对絮凝除浊的影响。结果表明,最佳絮凝除浊条件是:原水浊度大于1000NTU,普鲁兰投加量2.0mg/L,硫酸铝投加量10mg/L,搅拌强度200r/min,pH值5.0~8.5,水温5~35℃。 Using orthogonal experiment to make certain the optimal condition for removing turbidity from raw water by microbial flocculant pullulan. The effects of the turbidity of raw water, dosage of drug, hydraulic condition, pH values, water temperature and some other factors on turbidity removal by flocculation were analyzed. The results show that the optimal condition for turbidity removal with flocculation process is: the turbidity of raw water exceeds 1000 NTU, the dosage of pullulan and aluminium sulphate are 2.0 mg/L, 10 mg/L respectively, the stirring intensity is 200 r/min, the pH value is 5.0 - 8.5, the water temperature is 5 - 35 ℃.
出处 《工业用水与废水》 CAS 2005年第5期30-32,共3页 Industrial Water & Wastewater
关键词 微生物 絮凝剂 普鲁兰 给水处理 microorganism flocculant pullulan water supply treatment
  • 相关文献

参考文献5

二级参考文献59

共引文献207

同被引文献3

引证文献1

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部