摘要
以胞外聚合物作为生物吸附剂,对水中微量Cu2+的生物吸附特性进行研究,分析了原始pH值、胞外聚合物投加量、吸附时间对Cu2+吸附去除率的影响。研究结果表明:当初始Cu2+的质量浓度为10mg/L时,吸附最佳原始pH值范围为2～5,胞外聚合物的投加量为16mg/g,吸附时间为40min。Cu2+的吸附过程可分为3个阶段:①8min的快速吸附阶段;②8～40min达表观一级动力学吸附阶段;③吸附-解吸平衡阶段。Cu2+吸附等温线与Freundilich方程拟合良好。
With extracellular polymeric substances as biological adsorbent, the biosorption property of it on trace amount of Cu^2＋ in water was studied, the effect of the initial pH value, the dosage of extracellular polymeric substances, the adsorption time on the removal rate of Cu^2＋ were analyzed. The results of the test show that： when the initial mass concentration of Cu^2＋ is 10mg/L, the optimal initial pH value for adsorption is 2 - 5, the dosage of extracellular polymeric substances is 16mg/g, the adsorption time is 40min. the adsorption process may be separated into the following 3 phases： ① fast biosorption phase within 8 rain; ② phase of biosorption from 8 rain to 40 rain in accordance with first-order kinetic model; ③ adsorption-desorption equilibrium phase. The, adsorption isotherm of Cu^2＋ fits the Freundilich equation well.
出处
《工业用水与废水》
CAS
2005年第5期36-38,共3页
Industrial Water & Wastewater
基金
国家高技术研究发展计划(863计划)资助项目(2002AA601240)
关键词
污水处理
胞外聚合物
生物吸附
铜离子
wastewater treatment
extracellular polymeric substances
biosorption
copper ion
