摘要
碳纤维经混杂ＳｉＣ_ｐ后用压力浸渍成型方法制备成Ｃ／Ａｌ复合材料，分析混杂的ＳｉＣ_ｐ对Ｃ／Ａｌ复合材料力学性能的影响。测试了制备成的复合材料性能，并用ＳＥＭ对复合材料断面组织与断口形态进行分析。结果表明，混杂的ＳｉＣ_ｐ可以分隔纤维，有利浸渍，使纤维分布均匀从而提高了复合材料的性能，而用ｓｏｌ－ｇｅｌ方法涂复ＳｉＣ层并混杂ＳｉＣ_ｐ可获得最佳的性能。
The carbon fiber reinforced aluminium composite material was fabricated by means of vacuum pressure infiltration to study the effects on the infiltration and on the properties of the SiC particles hybridized in carbon fibers. The tensile and bending properties were determined and the microstructure and fractography were investigated by the SEM. It was demonstrated that the SiC_P hybridized in fibers can separate the clustered fibers and prevent the contact of fibers to provide a better fiber distribution ,which is beneficial to infiltration and composite material properties. Optimum properties have been shown in the material made up of sol-gel SiC coating fibers along with SiC_P hybridizing.
出处
《复合材料学报》
EI
CAS
CSCD
北大核心
1996年第1期66-71,共6页
Acta Materiae Compositae Sinica
基金
国家自然科学基金
关键词
铝基
复合材料
碳化硅颗粒混杂
真空压力
浸渍
C/Al composite materials
SiC_P hybrid
vacuum pressure infiltration
sol-gel coating
