期刊文献+

流化床式气流磨关键技术及其进展 被引量:9

Key Technology of Fluidized Bed Counter-jet Mill and Its Progress
下载PDF
导出
摘要 介绍了流化床式气流磨的工作原理及特点,对喷嘴、粉碎、分级等关键部分相关的技术研究进展分别进行了阐述,表明改进和提高喷嘴、粉碎宝、分级机等核心部件的性能和协调各个部分最优化工作能够使流化床式气流粉碎系统达到最佳工作状态,从而提高产品产量和质量。 The working principle and advantages of fluidized bed counter-jet mill were introduced. The recents research of key technology of fluidized bed mill, such as nozzle, comminution, classification, were reviewed, It's shown that the best working state of fluidized commter-jet mill can be achieved by improving on and optimizing key parts and the quality and quantity of products can be improued.
出处 《中国粉体技术》 CAS 2005年第6期42-44,共3页 China Powder Science and Technology
基金 山东省科学计划发展计划项目资助 编号:031090128
关键词 流化床 气流粉碎 喷嘴 分级 fluidized bed jet mill nozzle classification
  • 相关文献

参考文献13

  • 1李凤生.超细粉体技术[M].北京:国防工业出版社,2001..
  • 2Xiaobing Zou,Xinxin Wang,Chengnu Luo,et al.Measuring the gas flow from a supersonic nozzle used in a 1.5-MA gas puff Z pinch.IEEE Trans- actions on Plasma Science,2002,30(2):482-487.
  • 3谢峻石,何枫.收缩喷嘴内部流道型线对射流流场的影响[J].机械开发,2000(4):42-48. 被引量:17
  • 4何枫,谢峻石,杨京龙.喷嘴内部流道型线对射流流场的影响[J].应用力学学报,2001,18(4):114-119. 被引量:57
  • 5Grujicic M,Tong C,DeRosset W S,et al.Flow analysis and nozzle-shape optimization for the cold-gas dynamic-spray process[J].Proceedings of the Institution of Mechanical Engineers,Part B Engineering Manufacture,2003,217(11):1603 - 1613.
  • 6Han T,Kalman H,Levy A.DEM simulation of particle comminution in jet milling[J].Particulate Science and Technology,2002,(20):325-340.
  • 7王三泰.德国OHL MANN气流磨的基本原理及配置[J].硫磷设计与粉体工程,2001(1):45-49. 被引量:1
  • 8孟宪红.[D].东北大学,1994.
  • 9陈海焱,陈文梅.超细粉颗粒形貌控制技术的研究[J].金刚石与磨料磨具工程,2003,23(4):65-68. 被引量:17
  • 10Bosma J C Hoffmann.On the capacity of conti-nuous powder classification in a gas fluidized bed with horizon tal sieve-like baffles[J].Powd er Technology,2003,134(1):1 - 14.

二级参考文献30

  • 1阎超.流体机械内部流动数值计算方法的新进展(一)[J].流体机械,1994,22(8):35-38. 被引量:7
  • 2张少明,叶旭初,王京刚.NHF-Ⅱ空气离心转子超细分级机的性能[J].化工学报,1995,46(2):188-192. 被引量:6
  • 3卓震 刘 雪东 等.扁平式气流粉碎机粉碎流场图谱分析.'96中日粉体技术研讨会论文集[M].,1996..
  • 4伊藤均.关于STJ气流磨的大型化问题.'96中日粉体技术研讨会论文集[M].,1996..
  • 5刘雪东 卓震 等.离心式超细空气分级机研究(Ⅱ)[J].化学工程,1998,26(6).
  • 6[1]Vasil' ev, O.A. Minin, S.N., Shipovskikh, A. Investigation of the flow structure in nozzles with a throat section of constant height[J] Fluid Dynamics, 1991, 25 (6): 944-949,0015-4628.
  • 7[2]Katanoda Hiroshi, Miyazato Yoshiaki, Masuda Mitsuharu, Matsuo Kazuyasu. Numerical calcu lation of underexpanded axisymmetric supersonic jet (Effects of nozzle divergence angle and Mach number on shock cell length) [C] . Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, 1995.
  • 8[3]Yang Geunyoung, Choi Mansoo, Lee Joon Sik. Experimental study of slot jet impingement cooling on concave surface: Effects of nozzle configuration and curvature[J]. International Journal of Heat and Mass Transfer, 1999, 42 (12): 2199- 2209.
  • 9[4]W.R.Quinn and J.Mitlitzer. Effect of Nonpaarallel Exit Flow on Round Turbulent Free Jets[J] .Int.J.Heat and Fluid Flow, 1989, 10 (2).
  • 10[5]Masashi KASHITANI, Yoshiaki MIYAZATO, Mitsuharu MASUDA and Kazuyasu MAT SUO.Numerical and Experimental Investiga tions of Supersonic Jets from Sootblower Nozzle [J].JSME International Journal Series B, 1998, 41 (2): 375-380.

共引文献106

同被引文献48

引证文献9

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部