期刊文献+

尖晶石型Li-Mn-O多元素掺杂的高温电化学特性(英文) 被引量:3

Electrochemistry Performance for the Multiple Doping Spinel of Li-Mn-O at Elevated Temperature
下载PDF
导出
摘要 采用高温固相浸渍法合成了多元复合掺杂尖晶石型锰酸锂Li1·02MxMn2 -xQyO4 -y正极材料。XRD表征合成的产物均为良好的尖晶石型结构材料; SEM表明所合成的产物颗粒均匀且有良好的粒径分布。以该物质作为锂离子电池的正极材料组装成扣式电池,经充放电循环测试可知:多元素掺杂的尖晶石型锰酸锂正极材料Li1·02 Coa CrbLac Mn2_a_b_c FyO4 -y较富锂尖晶石和单元素Co、Cr掺杂的正极材料能够更好地抑制电池的可逆容量在充放电过程中的衰减,循环性能有了很大改善,表现出很好的电化学可逆特性, 80次循环后放电容量仍能保持94·5 %以上;特别是高温(55 ℃)性能更加突出, 40次循环后放电容量仍能保持102·1mA·h/g (91·5 %)以上。作为锂离子电池的正极材料,该复合掺杂材料是众多取代钴酸锂材料中最具竞争力的材料之一,也有望成为锂离子动力电池的正极材料。 The effect of doping on the electrochemical performance of modified spinel Li-Mn-O, which is used as cathode material in Lithium - ion battery, was studied. The spinel materials Li1.02MxMn2-xQyO4-y (M = Co, Cr, La; x = a + b + c; Q = Cl, F; ) doped with several ions was prepared by solid-state method after the pretreatment of conversion under low temperature, at elevated temperature. X-ray diffraction showed that 'all the samples have perfect spinel structure. The results of measurement by SEM indicated that the particles of the samples had uniform size and were distributed evenly. The results of the charge-discharge curves showed that Li1.02MxMn2-xFyO4-y and Li1.02MxMn2-xClyO4-y had better performance than those un-doped or single-element doped materials according to the inhibition of decline of reversible capacity of spinel Li-Mn-O material. Therefore, cycle performance had been improved so obviously that 94.5% of the initial capacity was preserved respectively after 80 cycles, and that 91.5% ( 102.1 (mA·h) /g) of the initial capacity was preserved respectively after 40 cycles at elevated temperature (at 55 ℃ ) . As cathode material of lithium-ion battery, this multiple doping spinel is one of the most competitive substitutes for LiCoO2.
出处 《中山大学学报(自然科学版)》 CAS CSCD 北大核心 2005年第A02期26-29,共4页 Acta Scientiarum Naturalium Universitatis Sunyatseni
基金 国家自然科学基金资助项目(20273047)
关键词 锂离子电池 多元掺杂 正极材料 高温化学性能 lithium-ion battery multiple doped spinel cathode material electrochemical characterization of elevated temperature
  • 相关文献

参考文献10

  • 1WHITTINGHAM M S.Lithium batteries and cathode materials[J].Chem Rev,2004,104:4271-4301.
  • 2YOSHIO N.Lithium-ion secondary batteries:past 10 years and the future[J].J Power Sources,2001,100(1-2):101-106.
  • 3CHEN Y,WANG G X,KONSTANTINOKV K,et al.Synthesis and characterization of LiCoxMnyNi1-x-yO2 as a cathode material for secondary lithium batteries[J].J Power Sources,2003,119-121:184-188.
  • 4KANA A M,MANTHIRAN A.Surfact/chemically modified LiMn2O4 for lithium-ion batteries[J].Electrochemical and Solid-State Ltters,2002,5(7):A167-A169.
  • 5HYUN J B,DONEPUDI V S,PRAKASH J.Preparation and characterization of partially substituted LiMyMn 2-yO4(M = Ni,Co,Fe) spinel cathodes for Li-ion bateteries[J].Electrochimica Acta,2002,48:443-451.
  • 6AMATUCCI G G,BLYR A,SIGALA C,et al.Surface treatment of Li 1+xMn 2-xO4 spinel for improoved elevated temperature performance[J].Solid state ionics,1997,104:13-25.
  • 7WU C,WU F,CHEN L Q,et al.X-ray diffraction and X-ray photoelectron spectroscopy analysis of Cr-doped spinel LiMn2O4 for Lithium-ion batteries[J].Solid State Ionics,2002,152-153:335-339.
  • 8MYUNG S T,KOMABA S,NAOAKI K.Enhanced structureal stability of Al-doped LiMn2O4 spinel synthesized by the emulsion drying method[J].J Electrochem Soc,2001,148(5):A482-A489.
  • 9ZHENG Z S,TANG Z L,ZHANG Z T,et al.Surface modification of Li 1.03Mn 1.97O4 spinels for improved capacity retention[J].Solid State Ionics,2002,148:317-321.
  • 10YOSHIO MASAKI,XIA Y Y,NAOKI KUMADA,et al.Storage and cycling performance of Cr-modified spinel at elevated temperatures[J].Journal of Power Sources,2001,101:79-85.

同被引文献25

引证文献3

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部