摘要
利用新研制的土工静力–动力液压三轴–扭转多功能剪切仪,针对相对密度为30%的饱和福建标准砂,进行了均等固结条件下的不排水循环单向剪切以及轴向和扭转双向耦合循环剪切等多种复杂循环剪切试验,并在控制不同的初始固结参数的三向非均等固结状态下,进行了循环扭剪试验。分别研究了循环剪切应力路径、初始主应力方向、初始偏应力比、初始中主应力系数等因素对孔压与累积耗散能关系的影响。初步建立了复杂应力条件下饱和松砂的孔隙水压力增长的能量模式。
The newly developed static and dynamic universal triaxial different types of experimental test of saturated Fujian loose sand. The and torsional shear apparatus was used to perform samples were subjected to cyclic torsional shear and cyclic vertical-and-torsional coupling shear with rotation of principal stress axes under isotropic consolidation as well as cyclic torsional shear under anisotropic consolidation condition with different initial consolidation parameters. The influence of cyclic shear stress path, orientation of initial major principal stress, initial ratio of deviatoric stress and initial coefficient of intermediate principal stress on the empirical relationship between vibration-induced pore water pressure and the accumulative energy dissipation during cyclic shear was investigated. The energy-based model of pore water pressure development for saturated loose sand under complex stress condition was preliminarily established.
出处
《岩土工程学报》
EI
CAS
CSCD
北大核心
2005年第12期1380-1385,共6页
Chinese Journal of Geotechnical Engineering
基金
国家自然科学基金资助项目(50179006)
国家自然科学基金重点基金资助项目(50439010)
教育部跨世纪优秀人才培养计划研究基金资助项目(教技函[1999]2号)
中国科学院武汉岩土力学研究所领域前沿基础研究基金资助项目(Q110305)
关键词
孔隙水压力
饱和松砂
复杂循环剪切试验
循环扭剪试验
三向非均等固结
孔隙水压力的能量模式
pore water pressure
saturated loose sand
complex cyclic shear tests
cyclic torsional shear tests
three-directional anisotorpic consolidation
energy-based model of pore water pressure
