摘要
Three types of turbidites are identified in the studied area, including proximal turbidite along the northern steep slope （alluvial fans, fan delta, and subaqueous fans via short-distance transportation）, distal turbidites along the southern gentle slope （stacked sliding of delta and fan delta front）, and fluxoturbidite in the central depression. Detailed studies of several case histories and the relationship between sedimentary facies and faults suggest a significant role of tectonic setting and faults in the development of turbidite, which created source areas, effected slope topography, controlled the climate and paleo-environment, and formed enough slope angle and slope break for sedimentary instabilities and massive block movement to form turbidite. According to statistics, 0.86%, with an average value of 40.3%, of the trap volumes in the 69 identified Tertiary lacustrine turbidites in the Jiyang Superdepression in the Bohai Bay Basin are filled with oil. The porosity and permeability of turbidite sands vary widely. The productive reservoirs are generally those from the braided channels of both distal and proximal turbidite, and from the main channel of proximal turbidite, with a low carbonate content and the porosity and permeability higher than 12% and 1 mD respectively. Most of the lithologic oil pools in the Jiyang Superdepression are enveloped by the effective source rocks, and the percentage of the trap volume generally increases with the hydrocarbon expulsion intensity of source rocks. This is in contrast with structural-lithologic traps （i.e. proximal turbidite along the steep slope and distal turbidite along the gentle slope）, in which, graben-boundary faults play an important role in oil migration, as the turbidites are not in direct contact with effective hydrocarbon source rocks.
Three types of turbidites are identified in the studied area, including proximal turbidite along the northern steep slope （alluvial fans, fan delta, and subaqueous fans via short-distance transportation）, distal turbidites along the southern gentle slope （stacked sliding of delta and fan delta front）, and fluxoturbidite in the central depression. Detailed studies of several case histories and the relationship between sedimentary facies and faults suggest a significant role of tectonic setting and faults in the development of turbidite, which created source areas, effected slope topography, controlled the climate and paleo-environment, and formed enough slope angle and slope break for sedimentary instabilities and massive block movement to form turbidite. According to statistics, 0.86%, with an average value of 40.3%, of the trap volumes in the 69 identified Tertiary lacustrine turbidites in the Jiyang Superdepression in the Bohai Bay Basin are filled with oil. The porosity and permeability of turbidite sands vary widely. The productive reservoirs are generally those from the braided channels of both distal and proximal turbidite, and from the main channel of proximal turbidite, with a low carbonate content and the porosity and permeability higher than 12% and 1 mD respectively. Most of the lithologic oil pools in the Jiyang Superdepression are enveloped by the effective source rocks, and the percentage of the trap volume generally increases with the hydrocarbon expulsion intensity of source rocks. This is in contrast with structural-lithologic traps （i.e. proximal turbidite along the steep slope and distal turbidite along the gentle slope）, in which, graben-boundary faults play an important role in oil migration, as the turbidites are not in direct contact with effective hydrocarbon source rocks.
