期刊文献+

纯水射流路面清洗效果的模糊预测和实验验证 被引量:7

The Use of Fuzzy Logic for the Prediction of Pure Water Jets Road Surface Cleaning and Experimental Verification
下载PDF
导出
摘要 研究了使用纯水射流进行路面清洗时,影响路面清洗率的清洗参数.采用模糊数学方法建立了清洗率预测的数学模型,通过实验建立了用于预测清洗率的模糊规则库.通过规则推理,实现了在给定输入参数条件下,对清洗率的准确预测.经实验验证,预测误差小于5%. The cleaning parameters affecting cleaning rate using pure water jets to clean road surface were researched, A mathematical model for predicting the cleaning rate was established using fuzzy mathematical method. A fuzzy rule base characterizing the relationship between input and output parameters was built by experiments. The prediction of cleaning rate was achieved under the condition of given input parameters by rule-based fuzzy reasoning. The prediction error is within 5% through experimental verification.
作者 高道明 陈杰
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2006年第2期234-238,共5页 Journal of Shanghai Jiaotong University
基金 上海市经委科技基金资助项目
关键词 纯水射流 路面清洗 清洗率 清洗参数 模糊规则库 pure water jets road surface cleaning cleaning rate cleaning parameters fuzzy rule base
  • 相关文献

参考文献12

  • 1Summers D A. The effectiveness of waterjet sprays in cleaning and the mechanisms for disintegration [A].6th International Symposium on Jet Cutting Technology[C]. Cranfield: BHRA Fluid Engineering, 1982. 81-91.
  • 2Saunders D H, Barton R E P. The use of fan-shaped water jets in preference to straight jets to remove a paint coating [A]. 8th International Symposium on Jet Catting Teehnology[C]. Cranfield: BHRA Fluid En-gineering, 1986. 353-361.
  • 3Meng P, Geskin E S. An analytical and experimental study of cleaning with moving water jets [J], Journalof Manufacturing Science and Engineering, Transactions of ASME, 1998, 120(3): 580-589.
  • 4Leu M C, Meng P, Geskin E S. Mathematical modeling and experimental verification of stationary waterjet cleaning process [J]. Journal of Manufacturing Science and Engineering, Transactions of ASME,1998, 120(3). 571-579.
  • 5Sohr J M, Thorpe M L. Coating removal with high-pressure water jets [J]. Aerospace Engineering,1993, 13(3): 19-23.
  • 6沈忠厚,汪志明,王开龙,徐依吉.固液两相射流清洗油管涂料的实验研究[J].石油大学学报(自然科学版),1996,20(5):30-34. 被引量:7
  • 7Babets K. Fuzzy logic model of waterjet depainting,Grapho Analytical Approach [A]. Proceedings of the 10th American Waterjet Conference[C]. Houston:Waterjet Technology Association, 1999. 87-105.
  • 8Kovacevic R, Fang M. Modeling of the influence of the abrasive waterjet cutting parameters on the depth of cut based on fuzzy rules [J]. International Journalof Machine Tools & Manufacture, 1994,34(1) : 55-72
  • 9Louis H, Schikorr W. Fundamental aspects in cleaning with high-speed water jets [A]. 6th InternationalSymposium on Jet Cutting Technology [C]. Cranfield:BHRA Fluid Engineering, 1982. 217-228.
  • 10Werner V L, Etienne E K. Defuzzification: Criteriaand classification[J]. Fuzzy Sets and Systems, 1999,108(2) : 159-178.

二级参考文献3

  • 1Masuda H Gotoh K 等.The removal of deposited particles using a high-speed air jet[J].粉体工学会志,1993,33(1):24-31.
  • 2孙家骏,水射流切割技术,1992年
  • 3郑洽馀,流体力学,1979年

共引文献9

同被引文献76

引证文献7

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部