期刊文献+

矩形盒曲面压料的变压边力拉深数值模拟分析 被引量:1

Numerical simulation analysis of variable BHF drawing of rectangular case on curve blank-holder
下载PDF
导出
摘要 运用数值模拟的方法研究了矩形盒曲面压料拉深时,采用随时间及位置变化的压边力对成形性能的影响。分析结果表明曲面整体压料时,渐增式压边力加载相应地可以提高矩形盒成形性,渐减式压边力加载不利于提高成形性。在压边圈直、曲边分块压料,并分别采用不同压边力模式进行组合加载的模拟实验中,直、曲边均采用渐增式压边力加载,在很大程度上提高了矩形盒拉深成形性。 Apply the method of numerical simulation, the effect to draw ability of rectangular case is researched which is based on curve blank-holder while the Blank-Holder Force(BHF) is changed with the time or displacement. The analysis rasult shows the gradual incr~ of BHF correspondingly improved the formability of rectangular case, on the contrary, the gradual decreases of that couldn't accomplish it. In the test of simulation of drawing when the blank-hoMer is separated to comer and straight edge and different model of BHF is adopt, when BHF gradually increased in comer and straight edge of flange, it' s improved the formability of rectangular case in a great degree.
机构地区 北京理工大学
出处 《现代制造工程》 CSCD 2006年第2期73-74,88,共3页 Modern Manufacturing Engineering
关键词 矩形盒 压边力 压料面 Rectangular case Blank-Holder Force(BHF) Blank-holder surface
  • 相关文献

参考文献7

二级参考文献18

  • 1水野{ 鄂大辛.角筒绞りにぉけるコ-ナ-变形と成形界限[J].塑性と加工,1997,38(9):70-72.
  • 2水野髙爾 鄂大辛.薄板の長方形筒绞りの实验[J].塑性と加工,1997,38(4):70-74.
  • 3E Doege, N Sommer. Blank-holder pressure and blankholder layout in deep drawing of thin sheet metal, Advanced technology of plasticity, Proceeding of the second intemational conference on technology of plasticity,1987, 1305.
  • 4M Ahmetoglu, T R Broek, G Kinzel, et al. Control of blank holder force to eliminate wrinkling and fracture in deep drawing rectangular parts, Annals of the CIRP, 1995, 44, 247.
  • 5S Kohara. Forming limit curves of aluminum and aluminum alloy sheets and effects of strain path on the curves. Journal of materials processing technology,1993,38,723.
  • 6Alejandro Graf , William Hansford. The influence of strainpath changes on forming limit diagrams of A16111-T4, International journal of mechanical sciences. 1994, 36, 879.
  • 7Siguang xu, Klaus J weinmarm. Prediction of forming limit curves of sheet metals using Hill's 1993 userfriendly yield criterion of anisotropic materials, International journal of mechanical sciences. 1998,40,913.
  • 8Yu-wei Wang, S Ali Sacedy, S A Majlessi, J E Beard. Strain path effects on the modified FLD caused by variable blank holder force. SAE Trans. of Materials & Manufacturing, 1995, (No.950695):522-531.
  • 9Ahmetoglu M, Coremans A, Kinzel G L, et al. Improving drawability of round and non-symmetric part[A]. Sheet Metal and Stamping Symposium [C].Detroit, MI, USA: SAE,1993. 113-120.
  • 10Obermeyer E J, Majlessi S A. A review of recent advances in the application of blank-holder force towards improving the forming limits of sheet metal parts[J]. Journal of Processing Technology, 1998,75:222-234.

共引文献78

同被引文献5

  • 1Wang Y,Majlessi S A.The design of an optimum binder force system for improving sheet metal formability,Proceedings of the 18th Biennial Congress IDDRG,International Deep Drawing Research Group,Lisbon,Portugal,1994:491-502.
  • 2Seng Z Q,et al.Adaptive FEM simulation for prediction of variable blank holder force in conical cup drawing[J].International Journal of Machine Tools & Manufacture,2004(44):487 -494.
  • 3ANSYS/LS-DYNA用户使用手册.
  • 4Wangoner R H.Comments and Observations from the International Conference and Workshop:FE-Simulation and 3-D Sheet Metal Forming Processes in Automotive Industry,1991:1-8.
  • 5孙成智,陈关龙,李淑惠,林忠钦.变压边力对矩形件成形性能的影响[J].塑性工程学报,2003,10(4):6-9. 被引量:40

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部