期刊文献+

激光熔覆直接制造金属零件的组织及力学性能分析 被引量:10

Microstructure and mechanical property analyses of the metal parts direct fabricated by laser cladding
下载PDF
导出
摘要 利用激光熔覆直接制造技术,采用不同的路径填充模式制备了不锈钢拉伸试样,对试样进行拉伸试验并对断口进行电镜扫描分析。结果表明,所制备的金属拉伸试样结合强度高,表现为韧性断裂,其屈服强度与断裂强度高于相近成分下常规加工方式所加工试样的相应值。激光扫描方向对拉伸性能的高低没有显著影响。拉伸试样显微组织晶粒细小,具有定向凝固特征。 Some tensile samples of stainless steel have been fabricated directly by laser cladding with three path-filling models. The results show that the fracture character of tensile samples with high bond strength is ductile rupture, and the yielded strength and rupture strength arc higher than the corresponding values of samples with the conventional processing methods. The orientation of laser scanning has no significant influence on tensile performance. Microstructure analyses of tensile samples by SEM show that crystalline grains are very fine and have the orientated solidification structures.
出处 《激光技术》 CAS CSCD 北大核心 2006年第2期130-132,160,共4页 Laser Technology
关键词 激光技术 激光熔覆 激光直接制造 力学性能 不锈钢 金属粉末 laser technique laser cladding direct laser fabrication (DLF) mechanical property stainless steel metal powder
  • 相关文献

参考文献7

二级参考文献36

  • 1颜永年,张伟,卢清萍,王刚,刁庆军,时晓明.基于离散/堆积成型概念的RPM原理和发展[J].中国机械工程,1994,5(4):64-66. 被引量:108
  • 2邓琦林,余承业.金属粉末的选择性激光烧结[J].航空工艺技术,1996(2):19-20. 被引量:9
  • 3邓琦林,余承业.金属粉末选择性激光烧结的后处理工艺分析[J].航空工艺技术,1996(1):31-33. 被引量:9
  • 4H.M. Wang, X.D. Lu, Y.F. Liu,G. Duan, L.X. Cai,C.M.Wang, Research progress on laser cladding for high- temperature wear and corrosion resistant transition metal silicides composites coatings. Mater Sci Forum,2003,426/432: 2551~2556
  • 5X.D. Lu, H.M. Wang. Microstructure and high-temperature sliding wear properties of laser clad Mo2Ni3Si/NiSi metal silicide composite coatings. Appl. Surf. Sci. ,2003,214:190-195
  • 6L.Q. Zhang, H. M. Wang. Microstructure and hightemperature sliding wear resistance of Cr13Ni5Si2/Cr3Si multiphase intermetallic alloy. Mater. Lett., 2003, 57:2710 -2715
  • 7X.D. Lu, H. M. Wang. Microstructure and dry sliding wear properties of laser clad Mo2Ni3Si/NiSi metal silicide composite coatings. J. Alloy Compound,2003,359:287-293
  • 8L.X. Cai, C.M. Wang,H.M. Wang. Microstructure and wear resistance of laser clad Cr - alloyed Ni2Si - NiSi metal silicide composite coatings. Mater. Lett. ,2003,57: 2914-2918
  • 9H.M. Wang, D.Y. Luan,L.X. Cai. Microstructure and sliding wear behaviors of tungsten reinforced W- Ni - Si metal silicides in -situ composites. Metall. Mater. Trans. A,2003,34A: 2005-2015
  • 10H.M. Wang, D.Y. Luan,L.Y. Zhang. Microstructure and wear resistance of laser melted W/W2Ni3Si metal silicides matrix insitu composites. Script. Mater. ,2003,48:1179-1184

共引文献217

同被引文献113

引证文献10

二级引证文献45

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部