期刊文献+

紫外光固化快速成形中提高加工效率的方法 被引量:2

Method of Improving Machining Efficiency for the UV Stereolithography
下载PDF
导出
摘要 光固化成形是一种基于逐层累加方式发展起来的新的制作工艺,零件的加工效率是成形中需要考虑的关键问题之一。本文分析了影响加工效率的三个因素,即扫描参数、制作方向和扫描方向,并通过实验证明了优化制作工艺能够显著提高零件的制作效率。 Stereolithography is a novel fabrication process based on and developed by layer manufacturing, and the fabrication efficiency of the prototyping parts is one of the key issues during manufacturing. Three factors affecting fabrication efficiency were ana- lyzed, that is scanning parameters, fabrication direction and scanning direction. Experiment shows that optimization of fabrication process can obviously improve the fabrication efficiency,
出处 《机床与液压》 北大核心 2006年第5期1-3,共3页 Machine Tool & Hydraulics
基金 国家"863"计划资助项目(2001AA421160)
关键词 光固化成形 加工效率 制作方向 扫描方向 Stereolithography Fabrication efficiency Fabrication direction Scanning direction
  • 相关文献

参考文献7

  • 1颜永年,张伟,卢清萍,王刚,刁庆军,时晓明.基于离散/堆积成型概念的RPM原理和发展[J].中国机械工程,1994,5(4):64-66. 被引量:108
  • 2Xue Yan, Gu P. A.. Review of Rapid Prototyping Technologies and Systems [ J ] . Computer- Aided Design,1996, 28 (4): 307-318.
  • 3Wu Maoliang, Zhao Wanhua, Tang Yiping, et al. A Novel Stereolithography Technology with Conventional UV Light [ J ] . Rapid Prototyping Journal, 2001, 5 ( 7 ) :268 - 274.
  • 4Kai L, Toshiki N, Takeo N. Multiple LED Photographic Curing of Models for Design Verification [ J ] . Rapid Prototyping Journal, 1999, 5 ( 1 ) : 6 - 11.
  • 5吴懋亮,李涤尘,赵万华,卢秉恒.CPS紫外光固化快速成形系统的研究与开发[J].中国机械工程,2000,11(10):1120-1122. 被引量:7
  • 6吴懋亮,方明伦,胡庆夕.光固化快速成形制造时间的影响因素分析[J].机械设计与研究,2004,20(1):43-44. 被引量:2
  • 7Cheng W, Fuh JFH, Nee AYC. Multi -objective optimization of part - building orientation in stereolithography [ J ].Rapid Prototyping Journal, 1995, 1 (2) : 12 -23.

二级参考文献4

共引文献114

同被引文献14

引证文献2

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部