期刊文献+

AZ31及ZE10镁合金板拉胀复合成形的研究 被引量:5

Drawing-bulging Performance of AZ31 and ZE10 Magnesium Alloy Sheets
下载PDF
导出
摘要 对AZ31及ZE10镁合金板在20~300℃条件下进行了力学性能、弯曲及锥杯试验。研究结果表明:随着变形温度升高,镁合金板材强度下降而塑性、弯曲性能、“拉深+胀形”复合成形性能明显改善。ZE10镁合金板比AZ31镁合金板具有更好的弯曲及拉胀复合成形性能。200℃、250℃试验时,ZE10镁合金锥杯试样可顺利拉深进入锥杯底部圆孔而不出现裂纹。 The mechanical properties, bending formality and conical cup value (CCV) of AZ31 and ZE10 magnesium alloys were investigated at the temperatures ranging from 20~300 ℃. The results show that the tensile strength can be decreased while the plasticity, bending formality and the drawing-bulging performance of the AZ31 alloy and ZE10 alloys can be obviously improved with the increasing in deformed temperature. ZE10 alloy sheets show a better bending formality and drawing-bulging performance compared with AZ31 alloy sheet. When tested at 200 ℃ and 250 ℃, the ZE10 magnesium alloy samples can be drawn into the round hole underside the conical cup with no advents of the fracture.
出处 《特种铸造及有色合金》 CAS CSCD 北大核心 2006年第5期270-272,共3页 Special Casting & Nonferrous Alloys
基金 广东省自然科学基金资助项目(04300124)
关键词 镁合金 “拉深+胀形”复合成形 性能 Magnesium Alloy, Drawing-bulging Performance, Properties
  • 相关文献

参考文献6

  • 1Aghion E,Bronfin B.Magnesium Alloys Development Towards the 21st Century.Materials Science Forum,2000,350~351:19~28
  • 2李元元,张卫文,刘英,陈维平,倪东惠.镁合金的发展动态和前景展望[J].特种铸造及有色合金,2004,24(1):14-17. 被引量:85
  • 3Friedrich H,Schumann S.Research for a "New Age of Magnesium" in the automotive Industry.Journal of Materials processing Technology,2001,117:276~281
  • 4滨葆夫.变形镁合金精密冲锻成型[J].素形材,2001,8:6-12.
  • 5Doege E,Droder K.Sheet Metal Forming of Magnesium Wrought Alloys-Formability and Process Technology.Journal of Material Processing Technology,2001,115:14~19
  • 6Fuh-Kuo Chen,Tyng-Bin Huang.Formability of Stamping Magnesium-Alloy AZ31 Sheets.Journal of Materials Processing Technology,2003,142:643~647

二级参考文献3

  • 1D. Eliezer,E. Aghion,F.H. (Sam) Froes. Magnesium Science, Technology and Applications[J] 1998,Advanced Performance Materials(3):201~212
  • 2A. Luo,M. O. Pekguleryuz. Cast magnesium alloys for elevated temperature applications[J] 1994,Journal of Materials Science(20):5259~5271
  • 3吕宜振,尉胤红,曾小勤,丁文江.镁合金铸造成形技术的发展[J].铸造,2000,49(7):383-387. 被引量:43

共引文献88

同被引文献38

引证文献5

二级引证文献42

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部