期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

材料特性和工艺参数对DMLS制件质量的影响

Influence of Material Characteristics and Processing Parameters on Quantity of DMLS Sintered Parts
下载PDF
导出
摘要 分析了金属粉末直接激光烧结(DMLS)中三类粉末材料的粘结机制,讨论了材料特性和工艺参数对成型件质量的影响。建立了液相体积分数和颗粒尺寸与烧结件致密度之间的关系式,提出从材料特性和工艺参数方面改善烧结件质量的途径。最后讨论了金属粉末激光直接烧结成行进一步研究的三个主要方向。 The bonding mechanism of three kind of powder partical material during direct metal laser sintering were analyzed, the influence of material characteristics and processing parameters on the quantity of sintered parts was discussed particularly.The equation of volume fraction of liquid phase and grains size and densification of sintered parts was established. The path of improving the quantity of sintcred parts from material characteristics and processing parameters were presented; The three main directions which DMLS （Direct metal laser sintering）research furtherly were discussed.
作者 郭华锋 周建忠 胡增荣 徐大鹏
机构地区 江苏大学机械工程学院
出处 《热加工工艺》 CSCD 北大核心 2006年第9期86-90,共5页 Hot Working Technology
基金 江苏大学高级人才启动基金资助项目(1281110002)
关键词 DMLS 粘结机制 材料特性 工艺参数 成型件质量 DMLS bonding mechanism material characteristics processing parameters quantity of sintered parts
分类号 TG249.9 [金属学及工艺—铸造]
  • 相关文献

参考文献26

  • 1冯涛,李志刚.快速成型与快速制模技术的最新发展——Euro Mold'2003考察报告[J].模具工业,2004,30(4):3-5. 被引量：20
  • 2Simchi A.On the development of direct metal laser sintering for rapid tooling[J].Journal of Materials Processing Technology,2003,141:319-328.
  • 3Zhu H H.Development and characterization of direct laser sintering Cu-based mental power[J].Journal of Materials Processing Technology,2003,140:314-317.
  • 4Tang Y.Direct laser sintering of a copper-based alloy for creating three-dimensional metal parts[J].Journal of Materials Processing Technology,2003,140:368-372.
  • 5Zhu H H.Influence of binder's liquid volume fraction on direct laser sintering of metallic power[J].Materials Science and Engineering,2004,A371:170-177.
  • 6Simchi A,Pohl H.ffects of laser sintering processing paramet ers on the microstructure and densification of iron powder[J].Materials and Engineering,2003,A359:119-128.
  • 7Agarwala Mukesh,Borell David,Beaman Joseph,etal.Direct selective lasersintering of metal[J].Rapid Prototyping Journal,1995,1(1):26-36.
  • 8Wang X C.Direct Selective Laser Sintering of Hard Metal Powder:Experimental Study and Simulation[J].Int J Adv Manuf Technol,2002,19:351-357.
  • 9Kruth J P,Schueren B V,Bonse J E,et al.Basic Powder Metallurgical Aspects in Selective Metal Powder Sintering[J].CIRP,1996,45(1):183.
  • 10Abdolreza Smchi,Frank pelzoldt,Haliko Pohl.Direct metal laser sintering:material consideration and mechanisms of particle bonding[J].The International Journal of Powder Metallurgy,2001,37(2):49-61.

二级参考文献73

  • 1赵东方,赵忠泽,庞国星.激光快速成型用覆膜砂工艺性能探讨[J].热加工工艺,2004,33(8):33-34. 被引量：12
  • 2邓琦林,余承业.金属粉末的选择性激光烧结[J].航空工艺技术,1996(2):19-20. 被引量：9
  • 3Jiang Wei, Xu Z X, Dalgarno K W, et al. Numerical prediction of thermal stresses in direct metal SLS process [A]. Proceeding of the Second International Conference on Rapid Prototyping & Manufacturing[C]. 2002.64 - 69.
  • 4Bugeda G,Cervera M,Lombera G. Numerical prediction of temperature and density distributions in selective laser sintering processes[ J]. Rapid Prototyping Journal, 1999,5 ( 1 ) : 21 - 26.
  • 5Greco A, Maffezzoh A. Polymer melting and polymer powder sintering by thermal analysis[ J]. Journal of Thermal Analysis and Calorimetry, 2003,72:1167 - 1174.
  • 6Vall N K, Balasubramanian B, Barlow J W, et al. A thermal model of polymer degradation during selective laser sintering of polymer coated ceramic powder[J]. Rapid Prototyping Journal, 1996,2(3) :24 - 40.
  • 7Fishcher P, Romano V,Weber H P, et al. Modeling of near infrared pulsed laser sintering of metallic powders[ A]. Proceedings of SHE [ C ]. Bellingham, 2003,5147 : 292 - 298.
  • 8Matsumoto M, Shiomi M, Osakada K, et al. Finite dement analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing[ J]. International Journal of Machine Tools & Manufacture, 2002,42:61 - 67.
  • 9Williams J D,Deckard C R.Advances in modeling the effects of selected parameters on the SLS process [ J]. Rapid Prototyping Journal, 1998,4(2) :90 - 100.
  • 10Sih S S, Barlow J W. Measurement and prediction of the thermal conductivity of powders at high temperature[A]. Proceedings of the 5th Annual SFF Symposium[ C]. Austin, 1994.321 - 329.

共引文献98

热加工工艺
2006年 第9期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部