期刊文献+

苯炔基封端的联苯型聚酰亚胺复合材料 被引量:16

Biphenyl polyimide composite endcapped with phenylethynyl
下载PDF
导出
摘要 采用改性单体原位反应聚合法(MPMR)制备了苯炔基封端的聚酰亚胺树脂,采用模压方法研究了聚酰亚胺复合材料的成型工艺。所制备的树脂和复合材料均具有很高的热稳定性;复合材料在371℃的力学性能保持率高于室温力学性能的50%;其玻璃化转变温度为449℃;纯树脂和复合材料在371℃空气中100 h的热失重小于3%。所研制的聚酰亚胺复合材料基本满足了371℃高温树脂的性能。 High temperature biphenyl polyimide resin endcapped with phenylethynyl was prepared using the modified polymerization monomeric reactants method (MPMR). The polyimide composite was fabricated by press molding, and the processing technique was discussed also. The polyimide composite shows high thermal stability at 371℃. The mechanical properties of the composite at 371℃ can maintain as much as 50% of mechanical properties at room temperature. The glass transition temperature of the polyimide composite is 449℃. The mass loss at 371℃ in air is less than 3% over 100 h at 371℃. The obtained polyimide composite achieves the basic demands of the high temperature resin at 371℃.
出处 《复合材料学报》 EI CAS CSCD 北大核心 2006年第3期1-4,共4页 Acta Materiae Compositae Sinica
基金 国家自然科学基金项目(50033030) 航空科技联合基金项目(10577018) 国家973项目资助(G2003CB615604)
关键词 聚酰亚胺 复合材料 苯乙炔 热性能 力学性能 polyimide composites, phenylethynyl, thermal properties, mechanical properties
  • 相关文献

参考文献16

  • 1Scola D A,Wai M.The thermo-oxidative stability of fluorinated polyimides and polyimides/graphite composites at 371℃[J].J Appl Polym Sci,1994,52:421-429.
  • 2Scola D A,Vontell J H.Process characteristics of high tem-perature polymers and composites[A].In:34th Int SAMPE Symp[C].USA:Society for the Advancement of Material and Process Engineering,1989:88-97.
  • 3Pater R H.Thermosetting polyimides:a review[J].SAMPE J,1994,30(5):29-38.
  • 4Brown A S.The high air force finds an ultrahigh temperature resin[J].Aero Am,1991:56-57.
  • 5Serafini T T,Devlvigs P,Lightsey G R.Thermally stable polyimides from solutions of monomeric reactants[J].J Appl Polym Sci,1972,16:905-915.
  • 6Wilson D.PMR-15 processing,properties and problems[J].Brit Polym J,1988,20:405-416.
  • 7Kantz M.Processing of PMR-15 prepregs for high temperature composites[J].Plastics Engineering,1990,46(1):27-30.
  • 8Russell J D,Kardos J L.Kinetics of imidization and crosslinking for AFR-700B polyimide[A].In:41st Int SAMPE Symp[C].USA:Society for the Material and Process Engineering,1996:120-134.
  • 9Vannucci R D,Cifani D.700 F(371 ℃) properties of autoclave cured PMR-Ⅱ composites[J].Soc Adv Mat Proc Eng,1988:562-575.
  • 10Florence M,Loustalot G.New thermostable synthesis:structure property relationships of nadic terminated telechelic fluorine polyimides[J].Polym Int,1996,41:135-149.

二级参考文献1

  • 1丁孟贤 张劲.聚酰亚胺前体溶液的制备[P].中国专利, ZL951002392.1995.

共引文献11

同被引文献131

引证文献16

二级引证文献81

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部