摘要
报道了瓦特型镍－碳化硅复合电沉积过程，研究了ＳｉＣ微粒的表面活性剂处理、粒子浓度、阴极电流密度、搅拌和ｐＨ值等因素对镀层硬度和耐磨性的影响．结果表明：在最佳的工艺条件下，可制备出性能优良的复合镀层（９％～１０％ＳｉＣ含量），其硬度是纯Ｎｉ的４～５倍，耐磨性是纯Ｎｉ的５～６倍．
Ni-SiC composites were electrodeposited from a Watt' s-type nickel-electrolyte,which contained the second phase particles suspended in the solution. The effects of surfactant, particle concentration, current density, stirring and PH on hardness and wear resistance of deposite coating were studied. The results showed that the hardness of the composite coating containing 9～10 per cent(wt) is 4～5 times of the hardness of pure electrodeposited nickel and the wear resistance continued is 5～ 6 times of pure nickel.
出处
《湖南大学学报（自然科学版）》
EI
CAS
CSCD
1996年第4期56-61,共6页
Journal of Hunan University:Natural Sciences
关键词
复合电镀
共沉积
镍-碳化硅
composite plating, codeposition, nickel-silicon carbide
