期刊文献+

AA1235铝箔坯料的中温相转变 被引量:12

Medium temperature phase transformation in AA1235 aluminium sheets for foils
下载PDF
导出
摘要 研究了AA1235铝箔坯料中温温度范围内相形成和转变的规律。结果表明,AA1235铝箔坯料在中温温度范围内存在两个相变反应:一个是从铝基体中析出α(AlFeSi)相的脱溶相变,另一个是β′(AlFeSi)→α(AlFeSi)的相变;α(AlFeSi)相的尺寸非常细小,在nm数量级;中间退火过程中Fe、Si元素在铝基体中的固溶度存在一极小值点,即最佳固溶贫化点,该现象的存在是上述两个对固溶度的变化起相反作用的相变过程共同作用的结果。 The formation and transformation of intermetallic compounds in AA1235 aluminium sheets for foils in medium temperature range in which recrystallization occurs was systematically studied. The results show that there are two types of phase transformations in the medium temperature range: one is the precipitation of α(AlFeSi) from the matrix, the other is the phase transformation of β'(AlFeSi) to α(AlFeSi). The transformation products α(AlFeSi) are nano-sized particles. An experimental phenomena, minimum solution point during intermediate annealing process, is also found and deemed to he the combined results of the two above mentioned phase transformations having inverse contribution to the solid solution of Si and Fe in Al matrix.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2006年第8期1394-1399,共6页 The Chinese Journal of Nonferrous Metals
基金 国家自然科学基金资助项目(58901412)
关键词 铝箔 相变 组织 中间退火 aluminium foils phase transformation microstructure intermediate annealing
  • 相关文献

参考文献12

  • 1Formisano V.Aluminium foil:Innovation and outlooks[J].Allum Leghe,1996,8(84):63-66.
  • 2钟利,赫崇富.铝箔轧制特点及轧机配置方式[J].轻合金加工技术,2003,31(3):1-6. 被引量:4
  • 3Nussbaum A I.Aluminium foil processing technology[J].Light Metal Age,1994,52(11/12):6-46.
  • 4Utsunomiya H,Sutcliffe M P F,Shercliff H R,et al.Evolution of matt surface topography in aluminium pack rolling.Part Ⅱ:effect of materials properties[J].International Journal of Mechanical Science,2004,46:1365-1375.
  • 5Hosono S,Hoshino K.Influence of rolling conditions on work hardening of aluminium foil[A].Proceedings of the 95th Fall Meeting[C].Osaka:Japan Institute of Light Metals,1998.127-128.
  • 6Higashi K.Commercialisation of high-performance aluminium foil,PACAL21[A].Proceedings of the 68th Symposium[C].Osaka:Japan Institute of Light Metals,2002.1-5.
  • 7Matsui K.Analysis of factors affecting pinhole formation in rolled aluminium foil[J].Kobe Steel Kobe Res Dev,1990,40(2):89-92.
  • 8Shoji R,Fukijura C.Precipitation of iron and silicon in cold rolled Al-Fe-Si sheet during annealing[J].Key Eng Mater,1990,44-45:163-180.
  • 9Kovács-Csétenyi E,Banizs K,Kalev N.Annealing behaviour of cold rolled strip cast aluminium sheet[J].Key Eng Mater,1990,44-45:181-188.
  • 10Tsubakino H,Yamamoto A,Kato T,et al.Precipitation in deformed Al-Fe and Al-Fe-Si dilute alloys[J].Materials Science Forum,2000,331-337:951-956.

二级参考文献1

  • 1王祝堂.最优化铝箔厂[A].哈尔滨:中国有色金属加工协会轻金属协会.全国铝箔生产技术交流会论文集[C].,1999.56-59.

共引文献20

同被引文献125

引证文献12

二级引证文献77

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部