期刊文献+

橡胶纯剪试件断裂力学分析 被引量:4

FRACTURE MECHANICS ANALYSIS OF RUBBER MATERIAL PURE SHEAR TESTPIECE
下载PDF
导出
摘要 在橡胶材料纯剪试件中,当裂纹的长度和试件的高度尺寸接近时,应变能释放率与裂纹尺寸无关,由于存在这个特点,纯剪试件经常被用来研究橡胶材料的断裂属性。文中对橡胶纯剪试件在试件中心线上分别存在中心裂纹和边缘裂纹,以及粘接界面分别存在中心裂纹和边缘裂纹的情况进行非线性有限元分析,并将有限元计算的应变能释放率与已存在的解进行比较。对于长裂纹,有限元解与已存在的解吻合较好;但是对于小裂纹,有限元解与已存在的解之间仍然存在一些差异。 The pure shear testpiece is commonly used for study of fracture in rubber because the tearing energy is independent of crack length provided the crack length is long relative to its height. Calculations of strain energy release rates have been made by nonlinear finite element analysis for a rubber pure shear testpiece with a central crack or a edge crack in the testpiece or at the rubber-to-metal bond. Nonlinear finite element analysis results for the strain energy release rate are compared with the previous results. Finite element analysis results for the strain energy release rate agree with the published solution for long cracks. However, they disagree with the solution for short cracks.
出处 《机械强度》 EI CAS CSCD 北大核心 2006年第5期751-756,共6页 Journal of Mechanical Strength
关键词 橡胶材料 纯剪 应变能释放率 非线性有限元 Rubber material Pure shear Strain energy release rate Nonlinear finite element
  • 相关文献

参考文献7

  • 1Rivlin R S,Thomas A G.Rupture of rubber.I.Characteristic energy for tearing.Journal of Polymer Science,1953,10:291~318.
  • 2Clapson B E,Lake G J.Truck tyre groove cracking:theory and practice.Rubber J.,1970,152(12):36~44.
  • 3Lake G J.Fracture mechanics and its application to failure in rubber articles.Rubber Chemistry and Technoooy,2003,76(3):567~591.
  • 4Sih G C,Liebowitz H.Mathematical theories of brittle fracture.In:Liebowitz H,Ed.,Fracture--An Advanced Treatise,Vol.Ⅱ.,NY:Academic Press,1968.
  • 5Yeoh O H.Analysis of deformation and fracture of pure shear rubber testpiece.Plastics,Rubber and Composites,2001,30(8):389~397.
  • 6Yeoh O H.Fracture mechanics of bond failure in the pure shear test piece.Rubber Chemistry and Technology,2003,76(2):483~494.
  • 7Yeoh O H.Relation between crack surface displacements and strain energy release rate in thin rubber sheets.Mechanics of Materials,2002,34:459~474.

同被引文献24

  • 1穆志韬,邢耀国.固体发动机工况中密封圈大变形接触应力分析[J].机械强度,2004,26(5):560-563. 被引量:8
  • 2王洪礼,任炜,乔宇.汽车轮胎动力学特性研究[J].机械强度,2002,24(3):345-348. 被引量:17
  • 3张振秀,沈梅,辛振祥.有限元软件MSC.Marc/Mentat在橡胶材料分析中的应用[J].世界橡胶工业,2005,32(12):32-35. 被引量:6
  • 4李晓芳,杨晓翔.橡胶纯剪试件变形与断裂的有限元分析[J].机械工程学报,2007,43(6):232-238. 被引量:8
  • 5Samadi Ali, Kashani Mehdi Razzaghi. Effects of organo-clay modifier on physical-mechanical properties of butyl-based rubber nano-composites [ J]. Journal of Applied Polymer Science, 2010, 116(4) : 2101-2109.
  • 6Gesoglu Mehmet, GUneyisi Erhan, Ozturan Turan, et al. Modeling the mechanical properties of rubberized concretes by neural network and genetic programming [ J]. Materials and Structures, 2010, 43 (1-2) : 31-45.
  • 7Firat Mehmet, Kozan Recep, Ozsoy Murat, et al. Numerical modeling and simulation of wheel radial fatigue tests [ J ]. Engineering Failure Analysis, 2009, 16 (5) : 1533-1541.
  • 8Kubota Masanobu, HIRAKAWA KENJI. The effect of rubber contact on the fretting fatigue strength of railway wheel tire [ J ]. Tribology International, 2009, 42(9): 1389-1398.
  • 9Yager Thomas J. Runway drainage characteristics related to tire friction performance [ R]. Long Beach, CA, USA: SAE Technical Paper Series, 1991, 912156: 1-8.
  • 10Liang Wei, Yu Hai, McGee Ryan, et al. Vehicle pure yaw moment control using differential tire slip [ C ]//Proceedings of the American Control Conference. Piscataway, United States: Institute of Electrical and Electronics Engineers Inc., 2009, 5160589: 3331-3336.

引证文献4

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部